Jump to content


Photo

Bad Flash On A 1.4 Xbox


  • Please log in to reply
2 replies to this topic

#1 fyk1

fyk1

    X-S Enthusiast

  • Members
  • 9 posts
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 01 August 2010 - 07:47 AM

as the title says i've made a mistake flashing my beloved 256k winbond eeprom :x
to take back in life the console the only thing is to install a modchip right?
and from the chip i'll be able to reflash the eeprom on the mainboard?

thanks for the replies and sorry for the awful english

smile.gif

#2 xboxmods2977

xboxmods2977

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,156 posts
  • Xbox Version:v1.0
  • 360 version:none

Posted 01 August 2010 - 09:33 AM

AFAIK, you cannot flash the TSOP on a 1.4 xbox with an LPC modchip. You would have to try to find a 29-wire modchip or build your own. Then you could re-flash your TSOP from there.

Buying an LPC modchip would fix your xbox but only as long as it remained permanently installed and activated.

#3 MistaGlock

MistaGlock

    X-S Enthusiast

  • Members
  • 19 posts

Posted 03 August 2010 - 09:57 PM

xboxmods is right about that but like he said the xbox is basically useless if you remove the modchip. if you want to revive the xbox mainboard you need to do as he said, build a 29 wire modchip and make one wire with a switch single pole single throw on and off. the tools youd need preferably is a 32pin pdip socket for the chip, some kind of 32 pin pdip chip for that socket "or you can use the plcc square chips" with at least a 256k flashrom capacity and a computer that has a socketed flashrom chip. or you can send it to me and i can most likely build you one




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users