Jump to content


No Video After Update New Dash12611

  • Please log in to reply
2 replies to this topic

#1 Xfreaks


    X-S Enthusiast

  • Members
  • 17 posts

Posted 18 November 2010 - 05:14 AM

I have problem with my non jtag Xenon (samsung drive).
Firstly i tried to play NFS but it automatically asked update from the disc. so i updated it and the new dash work fine also NFS but no avatar. then i updated the newdash with avatar from xbox site. but after the install something stranged happen, the graphic become blur and no video at all but it has the sound. tried several times reboot but still no video and i can hear the startup sound from my TV.
i already tried with another av cable with no luck too. no rrod all are green only no video.
i'm desperate how to fix it. can anyone give me suggest?


#2 oedi103


    X-S Young Member

  • Validating
  • Pip
  • 45 posts

Posted 08 December 2010 - 05:50 AM

you can try booting up with the sync button pressed to fix a failed db update but I`d say its rather randomly rrod`ed after the db update.Its the same issue as rrod but the xbox didnt recognise it and still shows green lights.I see it all the time.
You can try the hybrid fix or reflow the gpu if the sync button trick doesnt work.
good luck!

#3 letsmod


    X-S X-perience

  • Members
  • PipPip
  • 424 posts
  • Location:Northern Calif. (BAY Area)
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 08 December 2010 - 09:48 PM

it sounds more like the update corrupted something try reseting the video

To do this, start the Xbox 360 with no discs in it. Take controller 1 and press Y while pulling the right trigger. The system will then restart, and the video will reset. to default.

or try to clear update DB

Clear Any Failed system updates that cause the console to error.
With the console off, press and hold the sync up button (the small white one)
While holding the sync button press the power button to turn on the console
Continue to hold the sync button until the Console has booted up completely.
During the boot process the console should clear any failed updates, allowing you to use it normally sometiems.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users