Jump to content


Photo

Trying To Fix My Ps3's


  • Please log in to reply
1 reply to this topic

#1 Boogyman

Boogyman

    X-S Senior Member

  • Members
  • PipPip
  • 208 posts
  • Location:--Unknown--
  • Interests:Living
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 01 February 2011 - 01:54 AM

I have two PS3 and both are not working properly.

The first I bought was defective out of the box. I cannot get it to recognize when I plug in an ethernet wire and it doesn't pick up any wireless networks. Also the bluetooth doesn't work and if I have something plugged into the USB port the PS3 freezes on boot. I get an error code when I start it up, but I have contacted Sony about this error code and they do not know what it means.

The second I got from a friend and the blu-ray drive doesn't work on that one, and by this I mean it doesn't recognize when you put a disc in the drive.

What I am trying to do is take the working drive from PS3 A and put into PS3 B. Is this possible? Is there any hope for PS3 A?

PS3 A = Original defective PS3 (Model #: CECHL01)

PS3 B = Friends PS3, broken drive (Model #: CECHG01)

#2 MODSTERINC

MODSTERINC

    X-S Enthusiast

  • Members
  • 18 posts

Posted 05 February 2011 - 11:49 PM

take the bad bd out of the good ps3 take the pcb board off the bottom and put under the working bd drive only they ps3 will work. takes botht to make one work as for the other ps3 that crashes rebuild the harddrive and see what that does you can do this off the settings menu




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users