Jump to content


Photo

Use A Modchip To Actually Softmod


  • Please log in to reply
6 replies to this topic

#1 hyfall381

hyfall381

    X-S Expert

  • Members
  • PipPipPip
  • 602 posts
  • Location:Connecticut
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 15 February 2011 - 11:44 AM

whats up guys. im getting ready to softmod a friends xbox, and i cant find my darn memory card with the splinter cell exploit on it! but i do have an old solderless modchip. i know ive done something like this before, but i cant quite remember what i did.

heres what im thinking.. i put the chip in his xbox, then it boots modded, which means it can read one of those auto-installer discs. (first ill boot evox, ftp and save the eeprom to be safe)

then i run the disc, and the xbox becomes softmodded. after that, i can remove the chip and have a softmodded xbox?

i read on an older thread Here the instructions cerealkillajme wrote for doing just this. (post 11) using his CASH v1.1 disc. but i cant find that disc anywhere. i know enough not to ask either tongue.gif

so is there an alternative auto installer i can use? and will this method work? thanks a million!

*edit* - i know about slayers, a.i.d., etc. but by "alternative auto installer" what i mean is an auto installer that has some kind of option to allow a soft mod to be installed in an already modded xbox. thanks again.

Edited by hyfall381, 15 February 2011 - 11:48 AM.


#2 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 15 February 2011 - 04:00 PM

HeXEn 0.99B11-22 will do what you want. Find it with Google, burn to DVD-R at 4x or slower.

#3 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 15 February 2011 - 09:16 PM

indeed, HeXEn is a great choice for this, but i have googled it and all the links lead to dead torrents. i suggest searching for "HeXEn (heimdall's xbox engineering disc) rar" the second link i know to work.

#4 hyfall381

hyfall381

    X-S Expert

  • Members
  • PipPipPip
  • 602 posts
  • Location:Connecticut
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 15 February 2011 - 09:29 PM

Thanks Heimdall for the info and thank you Spliff for pointing me in the right direction. Indeed, some of these programs that are vital for softmodding Xboxs are getting harder and harder to find. I'll be sure to hang on to them.
I'll be trying this out sometime this week.

Thanks again guys smile.gif

#5 hyfall381

hyfall381

    X-S Expert

  • Members
  • PipPipPip
  • 602 posts
  • Location:Connecticut
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 18 February 2011 - 07:59 AM

One last question before I start.. Once I boot this disc, will I be able to FTP to my pc to save the eeprom? Or will I have to boot an EvoX disc first? I'd like to save the eeprom before i do anything else.
I should be doing this softmod very soon. Thanks again.

#6 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 18 February 2011 - 08:07 AM

when you boot the disc, go to softmod tools and install a krayzies 1.1.1 softmod. it will take you through the steps, of which the first step is to backup eeprom. you should also have FTP enabled the whole time.

#7 hyfall381

hyfall381

    X-S Expert

  • Members
  • PipPipPip
  • 602 posts
  • Location:Connecticut
  • Xbox Version:v1.0
  • 360 version:v1 (xenon)

Posted 18 February 2011 - 09:07 AM

great. thanks again Spliff. I'm looking forward to trying this out. I know these Auto-Installers have really made things a lot easier.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users