Frag After Soldering Write Points On V1.3 Xbox
Posted 16 February 2011 - 06:10 AM
Of course I can still put a mod-chip on it, but I would prefer to try to get the TSOP on the motherboard working . I have not yet attempted to flash it so I have a good feeling the problem lies within a broken connection (probably one of the lines used to enable flashing).
I thought about trying to use the TSOP itself as a 29-wire mod. I found a datasheet for the TSOP chip. What I have in mind is to measure continuity between the TSOP and the places where a 29-wire mod would be installed. If all these measurements are good, then there is determining where those traces run to beyond the insertion points for the 29-wire mod.
Posted 16 February 2011 - 03:16 PM
Posted 16 February 2011 - 07:28 PM
Has the layout of the motherboard changed between 1.3 and 1.4? I have a working 1.4 board to compare to.
EDIT: Ok nevermind, the 1.4 xbox I just bought yesterday also FRAGS and has not been modified at all.
The other thing to do is to take the board and do some tests with a logic analyzer at school.
Edited by uglyoldbob, 16 February 2011 - 07:53 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users