Jump to content


Photo

1.4 Tsop Flash


  • Please log in to reply
9 replies to this topic

#1 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 11 March 2011 - 01:18 AM

a v1.4 xbox has come into my possesion. i am thinking of doing my first TSOP flash. i have already softmoded it with Krayzies 1.1.1. i have been reading, and some of the tutorials show two points on the top of the MOBO and some say there is a 3rd on the bottom.

also, what bios do i need?

#2 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 11 March 2011 - 01:35 AM

For 1.2-1.5 Xboxes both solder bridges are on top of the motherboard. The point on the bottom is an alternative point.

In terms of BIOS, you need a 256kB BIOS i.e. iND-BIOS.5003, Evox M8+ or X2.4981.

#3 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 11 March 2011 - 01:38 AM

thanx mate

#4 BuraddoX

BuraddoX

    X-S Senior Member

  • Members
  • PipPip
  • 167 posts
  • Location:Australia
  • Interests:Loves to mod gaming consoles.
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 11 March 2011 - 01:49 AM

Download this guide man its so easy to TSOP
http://dwl.xbox-scen..._By_SLuSHIE.rar
my brother did the soldering to my 1.4 and it work out fine all you have to do is just solder two points
IPB Image
you just have to put just a little bit of solder to those two points there then use HexEn to flash the bios i used Xecuter2 4981.06 and it worked out fine happy.gif
ps on the image it says 1.2 but its the same to 1.2 to 1.5 also if its winbond you have to choose winbond flash normally 1.4 and 1.5 are winbond

Edited by BuraddoX, 11 March 2011 - 01:53 AM.


#5 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 11 March 2011 - 02:59 AM

TSOP flash is done, i put IND-BIOS.5003 on it with HeXEn. works lke a charm.

i want to edit, or rather delete the start up sequence. how do i go about doing this?

#6 Heimdall

Heimdall

    X-S Legend

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 5,749 posts
  • Location:UK
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 11 March 2011 - 03:13 AM

Edit C:\ind-bios.cfg to get rid of the options you don't want. The line you should start with is:

INTRO=1

but you should experiment with others as well.

Just make sure you don't change the lines:

DEFAULTXBE=\Device\CdRom0\default.xbe
AUTOLOADDVD=1

because they're the lines that allow you to boot from DVD if anything goes wrong.

#7 BuraddoX

BuraddoX

    X-S Senior Member

  • Members
  • PipPip
  • 167 posts
  • Location:Australia
  • Interests:Loves to mod gaming consoles.
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 11 March 2011 - 07:11 AM

QUOTE(spliff721 @ Mar 11 2011, 02:59 AM) View Post

TSOP flash is done, i put IND-BIOS.5003 on it with HeXEn. works lke a charm.

i want to edit, or rather delete the start up sequence. how do i go about doing this?

im glad to here that i knew you could TSOP its just as simple as softmodding happy.gif i was wondering about the xbox logo boot screen can i remove it cause i have flashed the bios ? or is that what you were asking spliff

#8 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 11 March 2011 - 06:01 PM

yes, with some bios, you can edit, change, and or remove the flubber screen and sound when the xbox starts up.
i imagine that it would greatly depend on what bios you use. but if your using IND-BIOS.5003, you can follow heimdalls post above to edit stuff.

#9 spliff721

spliff721

    X-S Senior Member

  • Members
  • PipPip
  • 239 posts
  • Location:seattle, WA
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 11 March 2011 - 06:39 PM

just found this page of cool Bios editing software, most notable is xbox color preset maker it allows you to change the colors of your flubber screen and whatnot. cool stuff.

#10 BuraddoX

BuraddoX

    X-S Senior Member

  • Members
  • PipPip
  • 167 posts
  • Location:Australia
  • Interests:Loves to mod gaming consoles.
  • Xbox Version:v1.4
  • 360 version:unknown

Posted 11 March 2011 - 11:28 PM

QUOTE(spliff721 @ Mar 11 2011, 06:39 PM) View Post

just found this page of cool Bios editing software, most notable is xbox color preset maker it allows you to change the colors of your flubber screen and whatnot. cool stuff.

that's cool spliff thanks for that but i couldn't found my bios editor to just edit the ini i guess i will just manually edit it. happy.gif
ps spliff you should include all your modded xboxs in your sig happy.gif

Edited by BuraddoX, 11 March 2011 - 11:39 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users