Ps3 Laser Help
Posted 12 March 2011 - 12:19 PM
This is my first post, ive tried seraching about this proplem but cant find anything so thought id try my luck here
There is a bit of plastic on both sides of the DVD drive that are connected by a metal bracket underneath that pivots.
When that pivot isnít connected to both sides the laser moves and lights up, but when it is on both sides all the motors and brackets move but the laser doesnít light up.
Any info will be much appreciated.
Posted 13 March 2011 - 04:26 PM
I'm going to just buy me a cheap broken blueray drive just to teach myself and experiment.I havent even seen how it looks inside expect on pictures but it would be a great to learn some things about it.
I have already seen youtube video and also read that the Bluray Drive had to be aligned.This could be essential to the drives operation....maybe??...
Checkout youtube search for some PS3 Blue ray drive alignment procedures to make sure everything is lined up like it suppose to be....The Ps3 I believe is full of secrets....
Thats the only thing I can think of right now but i will keep you issue in mind....I may have to repair it one day...
B.K. The Tech'
Edited by BKster, 13 March 2011 - 04:27 PM.
Posted 13 March 2011 - 05:51 PM
If you take the top plastic cover off the drive, and look at the lower right corner (BD ROM SLOT FACING YOU), you will see a small PCB with a tactile switch. The Slider arm on the right side contacts that switch actuator when the Laser unit is in the down position.
When the unit moves up, the slider pulls away from the switch and closes a circuit. this allows the BD rom drive to flash the laser and begin spinning the disc.
Sorry about the dust in the pic, it's an old part that I keep around for salvage.
Something is out of alignment with your elevator mechanism. It takes a little bit of toying with to get it in the right position.
Edited by MorboTron, 13 March 2011 - 05:53 PM.
Posted 14 March 2011 - 10:32 AM
Has anyone even heard of this problem before??
Did you put the V (boomerang) shaped metallic addon, correctly? it is responsible for elevating the laser properly.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users