Jump to content


Smccfged V0.3 - Modify Your Thermals

  • Please log in to reply
No replies to this topic

#1 TheRealJPizzle


    X-S Member

  • Members
  • Pip
  • 105 posts

Posted 06 May 2011 - 02:08 AM

So I got yet another anon email today and inside was this handy little SMC config tool, thanks to the anonymous author for a great release wink.gif


smccfged v0.3
thank you, scene.
purpose: modify the thermals of a given decrypted smc_config.bin
either overwriting smc_config.bin if --outputSMCCfg is not provided
or writing an output file as provided via --outputSMCCfg

limitation: this program will
  • force targets to be between 40 and 80 degrees celcius
  • force shutdowns to be between 60 degrees celcius and
  • the current smc_config's shutdowns
  • force targets to be lower than shutdowns
note: this program was built to be used with an ibuild-decrypted
smc_config.bin and fbbuild. fbbuild will error if for some
reason the CRC calculation is incorrect and this is a good™
thing. pay attention to fbbuild's output as it will error yet
still produce an image!

the algorithm for calculating the SMC Config's CRC was provided

usage: smccfged <options>
--inputSMCCfg=<decrypted smc_config.bin>
--outputSMCCfg=<still decryptedfilename>
[optional; if omitted, input file is overwritten]

power usage options: (all required)

Source : EliteModscene.com

Edited by TheRealJPizzle, 06 May 2011 - 02:09 AM.

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users