Jump to content


Photo

XeLL Updater v1.1


  • Please log in to reply
13 replies to this topic

#1 Xbox-Scene

Xbox-Scene

    Memba Numero Uno

  • Admin
  • 5,201 posts
  • Location:Yurop
  • Xbox Version:unk
  • 360 version:unknown

Posted 18 June 2011 - 01:11 PM

XeLL Updater v1.1
Posted by XanTium | June 18 08:11 EST | News Category: Xbox360
 
Tuxuser released a new version of his homebrew application that will allow you to easily update just the XeLL part of your freeBOOT NAND. It'd been updated following fbBuild v0.3's release yesterday, and adds support for the 13146 kernel:


XeLL Updater for freeBOOT - v1.1
for Kernel 9199, 12611, 12625 and 13146
Based on dashlaunch installer by cOz

This little tool is needed to update XeLL in Flash/NAND properly. The freeBOOT/fbBuild Rebooter has a different layout compared to XBR or pure-XeLL images so the XeLL binary isn't at the beginning of a NAND Block anymore.

Using the old updslot0/updslot1-Method (which worked on XBR and XeLL Images just fine) you would render your freeBOOT console non-booting (until you reflash it externally of course).

This application however works for freeBOOT/fbBuild :) It reads the specific part of the NAND, injects the XeLL binary and writes the blocks back.

Use it on Single-NAND freeBOOT only (9199, 12611, 12625 and 13146).

Greetz to cOz (and his strong nerves ;D), Cancerous, Redline99, GliGli, Ced2911, Razkar, Nathan and the whole team :)


Official Site: n/a, by Tuxuser
Download: n/a (built with XDK)
News-Source: logic-sunrise.com






#2 pif001

pif001

    X-S Senior Member

  • Members
  • PipPip
  • 153 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 18 June 2011 - 03:51 PM

Hi Tux,

1. with the current dashlaunch, how do you start xellous?
2. hdmi support in xell, is this still been investigated?



#3 radoman

radoman

    X-S Member

  • Members
  • Pip
  • 149 posts

Posted 18 June 2011 - 03:58 PM

QUOTE(pif001 @ Jun 18 2011, 03:51 PM) View Post

Hi Tux,

1. with the current dashlaunch, how do you start xellous?
2. hdmi support in xell, is this still been investigated?


1. Either by booting with the eject button or by running xell launch.
2. I believe the latest versions (xell reloaded?) support HDMI

#4 pif001

pif001

    X-S Senior Member

  • Members
  • PipPip
  • 153 posts
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 18 June 2011 - 05:39 PM

QUOTE(radoman @ Jun 18 2011, 03:58 PM) View Post

1. Either by booting with the eject button or by running xell launch.
2. I believe the latest versions (xell reloaded?) support HDMI


xell reloaded was beta....

Edited by pif001, 18 June 2011 - 05:40 PM.


#5 warbeast

warbeast

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,170 posts

Posted 18 June 2011 - 05:43 PM

is hdmi suport still only for xell and not xellous if so ill be better off keeping xellous on my nand and just using xelllaunch for hdmi support...

#6 Midnight Tboy

Midnight Tboy

    X-S X-perience

  • Members
  • PipPip
  • 446 posts

Posted 18 June 2011 - 05:55 PM

Sorry for the schoolboy questions....just want to be sure.

I have a jasper jtag (not sure if its a 16mb or more as didn't do this one myself)

It is running on the main Kinect dash (12611 I think - need to check)

Not sure whether its Xell or Xellous (I had a xenon which I jtagged myself ages back, but after that died and bought a new jasper premodded I kinda switched off from the version).

So would I be right in thinking....

1) This only updates Xell to the newer version......NOT the dashboard also?
2) What are the benefits of being on this newer version?
3) This updates automatically by just running it from USB? no adding the key files or original bin dumps etc?

#7 warbeast

warbeast

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,170 posts

Posted 18 June 2011 - 07:26 PM

ive not looked into xell/xellous releases for ages so what i say now might be out of date

xell-reloaded has better VGA resolution,USB detection,networking,using linux
xellous has great tools to read nand info over network to pc ect

now many people like me want xellous with the nand backup featues and also the new hdmi fix thats on xell
but as far as im aware there isnt a xellous with everything from xell-reloaded to hdmi support

so i use xellous on the nand and then just boot xell with hdmi support using fsd2 and xelllaunch.xex

Edited by warbeast, 18 June 2011 - 07:28 PM.


#8 xboxhaxorz

xboxhaxorz

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,192 posts
  • Location:Virginia
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 18 June 2011 - 08:12 PM

is there any benefit to updating xell if my jtag is working fine with fsd and dash launch?

the only time i used xell or xellous was to get my key

#9 pudink

pudink

    X-S Young Member

  • Members
  • Pip
  • 46 posts

Posted 19 June 2011 - 01:16 AM

the last time i messed up my xbox it was xell that saved me,but i guess i had an older version cuz that didnt have hdmi support I could only get picture when i connected with component.


So I am aware of the usefullness of such software I kindly ask people here,

-Can the old xell still save me if I update to new jtag dashboard(13146) or does the new dashboard makes the old versions of xell invalid?Wont I be able to save my jtag with xell on 13146 with older versions of xell?

thanks

#10 Midnight Tboy

Midnight Tboy

    X-S X-perience

  • Members
  • PipPip
  • 446 posts

Posted 20 June 2011 - 05:16 PM

ok so stupid question.

How can we tell whether our freeboot image is set to use Xell or Xellous at the current moment?

#11 pudink

pudink

    X-S Young Member

  • Members
  • Pip
  • 46 posts

Posted 21 June 2011 - 11:16 AM

QUOTE(pudink @ Jun 19 2011, 01:16 AM) View Post

the last time i messed up my xbox it was xell that saved me,but i guess i had an older version cuz that didnt have hdmi support I could only get picture when i connected with component.
So I am aware of the usefullness of such software I kindly ask people here,

-Can the old xell still save me if I update to new jtag dashboard(13146) or does the new dashboard makes the old versions of xell invalid?Wont I be able to save my jtag with xell on 13146 with older versions of xell?

thanks

anyone?

#12 anu|b|iss

anu|b|iss

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,115 posts
  • Location:Canada
  • Interests:xbox, martial arts,soldering, xbox, girlfriend, work and eat, sleep, followed by xbox and a shower.
  • Xbox Version:v1.4
  • 360 version:v1 (xenon)

Posted 23 June 2011 - 04:38 PM

yes you can still recover by booting with eject button, as long as xell/xellous is still working. and as long as you have a working backed up image

#13 pudink

pudink

    X-S Young Member

  • Members
  • Pip
  • 46 posts

Posted 23 June 2011 - 07:18 PM

QUOTE(anu|b|iss @ Jun 23 2011, 04:38 PM) View Post

yes you can still recover by booting with eject button, as long as xell/xellous is still working. and as long as you have a working backed up image

so I updated to the latest Dash and now the xell gives me an error,i guess i will have to update it.

I was depending on the old xell's ability to flash the nand with the working image from a usb thumb drive so I dont really feel like updating,I have heard the new xell dont support that kind of flashing nand image : / is it ture do you have any ideas?
thanks for the answer btw

Edited by pudink, 23 June 2011 - 07:20 PM.


#14 playonlcd

playonlcd

    X-S Member

  • Members
  • Pip
  • 98 posts
  • Location:Europe, Romania
  • Interests:Xbox 360 technical discussion
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 15 October 2011 - 09:47 PM

Hello,

Has anyone tried to update to xell reloaded with this tool on 13599 jtag?

Or you have to write the nand for that?

I am a little confused.

LE
I got my answears:
http://www.xbox360is...or-t451270.html

Edited by playonlcd, 15 October 2011 - 09:50 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users