Aladdin Advance 32, What Bios?
Posted 26 August 2011 - 04:18 AM
Which program do i use? The Exo X dashboard? Or there is something more secure and specific to my modchip?
Posted 26 August 2011 - 08:45 AM
Then another bad suprise...i discovered that the bios on modchip was so old that it can't load the dashboard if is connected a locked hard drive with a different key
Flash it using Evox.
Edited by Heimdall, 26 August 2011 - 08:46 AM.
Posted 26 August 2011 - 01:15 PM
No BIOS will do that - the BIOS still needs the correct key to unlock the disk.
Flash it using Evox.
Posted 26 August 2011 - 01:32 PM
Posted 26 August 2011 - 02:55 PM
I've not flashed the new bios, yet...what happened?
Posted 26 August 2011 - 03:49 PM
Posted 26 August 2011 - 05:02 PM
EDIT: i found that this is normal, but i don't understand why on the resistance where i solder the BT point says that are 20k ohm...i don't understand why...as a result, now the xbox turn on as soon as i connect the power cable...
Edited by Difio, 26 August 2011 - 05:19 PM.
Posted 10 October 2011 - 12:05 AM
I get no FRAG, black screen or something else, the xbox just boot normally the microsoft dash. I've checked all the solder and they are ok.
The only strange thing i saw is the eject LED: when i press quickly the power button the led at the beginning is red, then became green (and the ms dashboard loads perfectly), and when i press the button for 1 second at the beginning the led is red, then came orange. If i'am not wrong, this is normal, but the fact is that as soon as i leave the button after 1 second the led became green booting the ms dashbard without problem.
I really don't understand, the LPC solder is ok because if they weren't the xbox had to FRAG...
Any of you had experienced a situation like that? Could be a problem of the chip (may be it fried with the old xbox)? I had thought also to an incompatibility between the xbox (a 1.4) and the chips (or better, the old bios)...can somebody help me? Thanks..
Edited by Difio, 10 October 2011 - 12:18 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users