Just An Interesting Idea...
Posted 28 September 2011 - 01:20 AM
Posted 28 September 2011 - 03:56 AM
@ravendrow Just having the NAND's and CPU keys isn't enough. If you want to help, get one of those boxes glitched and serial'd, for serial
Edited by Gadorach, 28 September 2011 - 03:58 AM.
Posted 28 September 2011 - 04:27 AM
Posted 29 September 2011 - 05:48 PM
anyone know where to get one of the max232 chips?
You can find them at your local electronics depot, or order them in, they're not expensive.
I've confirmed that the MAX232, MAX232N, and MAX3232 will all work and have the same pinout so no adjustments need to be made for the diagram.
Also, besides serial, we're looking for POST output.
This can be achieved by wiring up LEDs marked at 1.2v-1.8v [I use 3v LEDs] to the POST bus on the bottom side of the board near the CPU and to the Xbox 360's Ground [any one will do].
Reading this out after crashes tells us where the Xbox 360 crashed along the boot chain. The LEDs provide a binary code to show this output.
We then take the binary code and convert it. The converted values tell us the failed boot section.
POST is currently more important than serial to us.
And as a special treat, one of our members, jsjar, made a banner for RGLoader.
For anyone interested in the current research that's been compiled into a Wiki-format, we've made a Wiki to house all the current data for all to see.
You can find it here: http://xedevwiki.com/wiki/Main_Page
Edited by Gadorach, 29 September 2011 - 06:26 PM.
Posted 01 October 2011 - 07:15 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users