Jump to content


Photo

Flashing Ecc To Slim, Someone With Experience Preferred


  • Please log in to reply
3 replies to this topic

#1 Definitely Wapner

Definitely Wapner

    X-S Senior Member

  • Members
  • PipPip
  • 182 posts
  • Location:New England
  • Xbox Version:v1.4
  • 360 version:v5.0 (360S - trinity)

Posted 01 October 2011 - 02:01 PM

Ok, I've built my ECC file, have 2 confirmed matching NAND dumps, and I've flashed the ECC file.

I'm using LPT and everything is detected fine. I flash nandpro lpt: +w16 image_00000000.ecc

Now, nandpro locates the ecc file. Just under the line "File: image_00000000.ecc" I get 3 other lines of script I didn't see in the tutorial:

Opt: Spare data will be initialized
Opt: Block markers will be initialized
Opt: Ecc will be re-calculated

Then, it goes ahead and writes the file all the way through to 4f with no errors. I've just never seen the above script before, so I don't know if it's an error or if it's just ignorable. Like I said, I didn't see it in the tutorial, so I figured I'd ask. Any input would be great. Thanks!

#2 jsjar

jsjar

    X-S Enthusiast

  • Members
  • 28 posts
  • Location:wales
  • Xbox Version:v1.4
  • 360 version:v3.0 (falcon)

Posted 01 October 2011 - 02:09 PM

there not errors it does that when you use +16 ignore it there fine

Edited by jsjar, 01 October 2011 - 02:11 PM.


#3 Definitely Wapner

Definitely Wapner

    X-S Senior Member

  • Members
  • PipPip
  • 182 posts
  • Location:New England
  • Xbox Version:v1.4
  • 360 version:v5.0 (360S - trinity)

Posted 01 October 2011 - 02:18 PM

QUOTE(jsjar @ Oct 1 2011, 08:09 AM) View Post

there not errors it does that when you use +16 ignore it there fine


Great, thanks alot. I've done many JTAG's in the past and never saw anything like this on nandpro, but then again, I've never used the "+" switch before when flashing or reading. Figured I'd ask anyway as this may help others.

#4 Morning Call

Morning Call

    X-S Senior Member

  • Members
  • PipPip
  • 229 posts

Posted 02 October 2011 - 08:13 AM

its normal

when using plus it calculates the ECC data to program to the nand.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users