Imgburn Burn Verify Fails At 50%
Posted 25 October 2011 - 03:40 AM
When ImgBurn verifies a XDG3 backup that was just burned error-free, it finds errors at exactly 50% every time.
Non-XDG3 games all burn and verify without any issues.
My drive's firmware, all drivers, and imgburn are up to date.
The games are either completely unplayable or are only partially playable.
The games were ripped with 0800 XDG3 v3.
Any ideas on why it would error at exactly 50% on every XDG3 disk verify?
Posted 29 October 2011 - 03:00 AM
I have followed the exact recommendation to the letter.
Benq 0800 v3 as reader <- with X360usb pro
iHAS324B with ixtreme burner firmware <- onboard sata setup
Verbatim MKM001 <- backup at x2.4
XBC with DAE v12 <- follow ixtreme burner tutorial
Backup Rage disk 1 and verify with no issue.
Backup Forza 4 disk 1 successful but verify failed.
Backup Rage disk 2 successful but verify failed.
I thought at first its Forza 4 that might be a problem.
But then Rage disk 2 also failed verify...
Not sure why we have to verify anyway...i never verify any disk before.
Posted 29 October 2011 - 07:17 PM
This is suggested in TeamX forum.
Hope this will help someone.
go to Tools>Drives>Change Advanced Settings>LiteOn
Make sure following option are enabled.
Smartburn = enabled
Force Hyper Tuning = enabled
Online Hyper Tuning = enabled
Apparently, you can also make the same changes in the EEPROM option.
And here is what i can find about the option.
Online Hyper Tuning:
To let drive check the write quality during recording and modify the writing strategy real-time in order to get better writing quality.
It may take more time for the recording if you enable this feature.
Force Hyper Tuning:
Basically, if drive supports Hyper Tuning, it will use Hyper Tuning to write for unknown media only.
If you want to use this function for all media, you need to enable this feature.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users