Jump to content


Photo

Matrix Freedom PCB for Liteon DG-16D4S Drives


  • Please log in to reply
39 replies to this topic

#1 Xbox-Scene

Xbox-Scene

    Memba Numero Uno

  • Admin
  • 5,201 posts
  • Location:Yurop
  • Xbox Version:unk
  • 360 version:unknown

Posted 30 October 2011 - 11:52 PM

Matrix Freedom PCB for Liteon DG-16D4S Drives
Posted by XanTium | October 30 18:52 EST | News Category: Xbox360
 
We received this email from Matrix Team:


Matrix Team is proud to announce the availability this week, of our new product: Matrix Freedom PCB.
Large quantities are available, all orders will be shipped immediately!

Features:
- Fits all Liteon DG-16D4S Drives
- Fully compatible with 9504, 0225 and 0401 fw revision.
- Supplied with external programmer to enable/disable write protect and reflash firmware. No need to open again the DVD or the Xbox360 once installed.
- An easy and simple swap out system for the original DVD board.
- Easily programmable using any SATA programming tool.
- Fully compatible with Jungleflasher software.

Matrix Freedom PCB Matrix Freedom PCB
Matrix Freedom PCB


Official Site: http://www.infinitymod.com






#2 snake3

snake3

    X-S Senior Member

  • Members
  • PipPip
  • 279 posts
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 31 October 2011 - 12:59 AM

very nice

#3 ZakMcRofl

ZakMcRofl

    X-S Senior Member

  • Members
  • PipPip
  • 287 posts

Posted 31 October 2011 - 01:53 AM

Price?

#4 ruciz

ruciz

    X-S X-perience

  • Members
  • PipPip
  • 333 posts

Posted 31 October 2011 - 02:17 AM

Matrix Infinity - top of the line PS2 chip

Matrix 360 glitch chip - expensive way to ship $3 of components.

Lets see where these boards lie- as I presume they are a clone of the TX boards and rely on TX/JF products to work....

#5 DrNugu

DrNugu

    X-S Enthusiast

  • Members
  • 3 posts

Posted 31 October 2011 - 02:46 AM

QUOTE(ruciz @ Oct 31 2011, 10:17 AM) View Post

Lets see where these boards lie- as I presume they are a clone of the TX boards and rely on TX/JF products to work....

Some people want options to paying a ridiculous $75 for the $ecuter pcb, so I'm happy someone is cloning this.

So what is the price?

#6 ydgmms

ydgmms

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,023 posts

Posted 31 October 2011 - 03:02 AM

but why... kamikazeeeee biggrin.gif

#7 klbarnes1

klbarnes1

    X-S Young Member

  • Members
  • Pip
  • 58 posts

Posted 31 October 2011 - 03:18 AM

WHATS UP PLAYA HATA'S! I tried installing a sputnik360 and ending up basically causing a big mess because I didn't have the right tools. Anyway long story short I need a pcp board to put in my 9504 slim. Luckily I already have my key because I had modded it before it got locked by the update. How much is this going to cost, I need to order one yesterday! Is the only soldering involved with this the ones for the colored wires? Thanks PLAYA'S!

Edited by klbarnes1, 31 October 2011 - 03:57 AM.


#8 death69inc

death69inc

    X-S Senior Member

  • Members
  • PipPip
  • 255 posts

Posted 31 October 2011 - 03:43 AM

like to see the price

if they are as same or higher than mx ic boards ill stick with my mxic's

if they are cheaper ill go with them as $55 for a mxic board is decent compared to $80 for a tx board but if it works and its cheaper why not.


Edited by death69inc, 31 October 2011 - 03:48 AM.


#9 chinmi

chinmi

    X-S Genius

  • Members
  • PipPipPipPip
  • 942 posts
  • Location:Mr. Chinmi From Indonesia

Posted 31 October 2011 - 03:50 AM

well, it's always nice to see a good competition...

but i bet tx will make the next firmware or jungleflasher will only compatible to their own sexecuter board....

but if this gonna be cheaper... well.... it's a win win solution for all of us...

#10 death69inc

death69inc

    X-S Senior Member

  • Members
  • PipPip
  • 255 posts

Posted 31 October 2011 - 03:53 AM

doubt that

as a tx board i just a clone of a mxic board with one of there sputnik boards embeded

dont see how they can lock out a clone of thiers

(never understood why they where so high) heard was chip supply issue but ........ more like no comp.

Edited by death69inc, 31 October 2011 - 03:54 AM.


#11 alukado

alukado

    X-S Enthusiast

  • Members
  • 13 posts

Posted 31 October 2011 - 04:08 AM

QUOTE(death69inc @ Oct 31 2011, 03:43 AM) View Post

like to see the price

if they are as same or higher than mx ic boards ill stick with my mxic's

if they are cheaper ill go with them as $55 for a mxic board is decent compared to $80 for a tx board but if it works and its cheaper why not.

Yoyobase are selling the Matrix Freedom PCB for $54.99, also their Matrix Glitcher and programmer are very cheap too.

Edited by alukado, 31 October 2011 - 04:09 AM.


#12 DARKFiB3R

DARKFiB3R

    X-S X-perience

  • Members
  • PipPip
  • 460 posts
  • Location:SE London
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 31 October 2011 - 04:54 AM

Stand out features for me are...

- Large quantities are available
- Supplied with an external programmer
- No need to open the DVD drive or the Xbox 360 again, once installed.

Sounds pretty sweet smile.gif

To the people bitching about TX (for a crime they haven't even committed), they do not create the firmware or JungleFlasher, so there will be no locking out of competitors products. It's not their choice to make, even if they would do such a shitty thing.

C4ever always shares his toys with the other kids in the playground, so nothing to worry about there.

And JF has code from all over the place, so they would have to be complete arseholes to try and lock anybody out.

So I think it's safe to remove those tinfoil hats smile.gif

#13 courier

courier

    X-S Member

  • Members
  • Pip
  • 72 posts

Posted 31 October 2011 - 08:19 AM

QUOTE(alukado @ Oct 31 2011, 04:08 AM) View Post

Yoyobase are selling the Matrix Freedom PCB for $54.99, also their Matrix Glitcher and programmer are very cheap too.

PFffffffffffffffffffffff really retard this clone production !!!!!!! for 16d5s guaranted not works 100%%%%%%%% muhaha.gif

#14 pitabread

pitabread

    X-S Enthusiast

  • Members
  • 15 posts

Posted 31 October 2011 - 08:57 AM

QUOTE(courier @ Oct 31 2011, 12:19 AM) View Post

PFffffffffffffffffffffff really retard this clone production !!!!!!! for 16d5s guaranted not works 100%%%%%%%% muhaha.gif


I'm confused where does it say it's for the 16d5s? I only see it's for DG-16D4s.

#15 courier

courier

    X-S Member

  • Members
  • Pip
  • 72 posts

Posted 31 October 2011 - 10:47 AM

QUOTE(pitabread @ Oct 31 2011, 08:57 AM) View Post

I'm confused where does it say it's for the 16d5s? I only see it's for DG-16D4s.

all new drive out is D5




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users