Jump to content


Photo

Xbox Contoller Not Working


  • Please log in to reply
2 replies to this topic

#1 RussWWFC

RussWWFC

    X-S Enthusiast

  • Members
  • 13 posts

Posted 16 November 2011 - 08:32 PM

OK, so I bought a secondhand xBox, and have modded it with evoX dashboard. Originally controller port 1 stopped working (or at least the controller did when it was plugged in there)

Now today, I have plugged in the FTP lead to the back, switched the console on and none of the ports work with the controller.

It isn't an original controller, it's a logic 3 one. I was working fine on all ports until recently, but now it works on none of them

Any suggestions as to what the issue is, I don't have another controller to test it with

Edited by RussWWFC, 16 November 2011 - 08:34 PM.


#2 gman060692

gman060692

    X-S Member

  • Members
  • Pip
  • 117 posts
  • Xbox Version:v1.6
  • 360 version:none

Posted 16 November 2011 - 08:44 PM

The most common problem that arises with controllers is a break or short in the cable.(usually due to years of stress on the wires) Try testing the controller cable for continuity and shorts.

#3 RussWWFC

RussWWFC

    X-S Enthusiast

  • Members
  • 13 posts

Posted 16 November 2011 - 08:47 PM

Thanks. And lo and behold, it's started working again. In port 1 too, so it sounds like you could be right




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users