Jump to content


Falcon Rgh Cold Boot Problems (x360glitch)

  • Please log in to reply
2 replies to this topic

#1 Reolin


    X-S Enthusiast

  • Members
  • 4 posts

Posted 28 November 2011 - 10:43 PM

Good day everyone.
Installed x360glitch (white china chip) into my falcon. So here is the problem - console will not cold boot - if it has been turned off for a long time, several first boots won't be successful. So I added green LED - debug pin 27. And here is what I get when xbox fails to boot - 3.3v on debug pin constantly. What can be wrong?

#2 Reolin


    X-S Enthusiast

  • Members
  • 4 posts

Posted 02 December 2011 - 04:16 PM

Ok, fixed. This chip in stock has 1.35v on both pin 15 and 7. You need to fix this - pin 15 should be 1.8v, pin 7 - 1.1. Here is what you need to do.
IPB Image

1.8v was taken from U5B2

Edited by Reolin, 02 December 2011 - 04:17 PM.

#3 beyond6666


    X-S Enthusiast

  • Members
  • 7 posts

Posted 23 February 2012 - 01:55 AM

I have confirm this voltages.

What did you exactly do? Did you just short connect this points:
point 15 with one side of resistor
point 7 with other side of resistor

What about red marker?
Can you take a picture of your RGH chip?

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users