Jump to content


Photo

X3 Wire Problem


  • Please log in to reply
3 replies to this topic

#1 Benni16v

Benni16v

    X-S Enthusiast

  • Members
  • 2 posts

Posted 15 December 2011 - 10:35 AM

Hi!

I bought a used X3 chip without anything - just the X3 - no cables no Adapters.

Now i need to solder the 2 cables Reset/Eject.
I donīt know which pin on the X3 is reset and which is eject and where i have to solder it to the Mainboard.

Need help.

It is a V1.6

thx

#2 pattythefatty

pattythefatty

    X-S Member

  • Members
  • Pip
  • 111 posts

Posted 17 December 2011 - 02:31 AM

seriously you just have the chip? you don't have the reset/eject board and the LPC rebuild PCB? I am not sure that i can help if you don't have the reset eject board.

here is a tutorial for the X3 install: http://teamxecuter.e...st.com/x3ce.pdf IN there you can see all the parts that you need.

you might all ready have that, but just in case, i thought I would link it.

Assuming you really don't have the LPC rebuild kit, there is a post somewhere on here that shows how to build the LPC with wires, but I'll be damned if I can find it right now. Ill try to find it or check my old documentation i saved to get that info.

I wouldn't know where to begin to solve the no reset board though. Someone way smarter than me needs to help with that.

You can also try to buy the reset board and other cables. Here is a website I have used before to buy things and they have a reset board and the D0 cable connector as well:

http://secure.llamma...ps-c-64_33.html

you might try posting in the xbox1 B/S/T to see if anyone there has the extra parts for sale, as it seems the prices on llama are kind of high if you ask me. Well 5 bucks for the board is fair, but 10 bucks for the D0 wire seems like highway robbery
-PTF


#3 pattythefatty

pattythefatty

    X-S Member

  • Members
  • Pip
  • 111 posts

Posted 17 December 2011 - 05:32 AM

OK I still couldn't find the post, and TBH I am not sure if it was x-scene or somewhere else. Anyway, I was able to find my old pictures. I copied several pics of the X3 installs and put them on one paper and printed it out. The photos weren't my original doing I just stuck several of them together into one sheet so i could take with me to my work bench. I wish I could credit the creators.

anyway, here is the image of how to rebuild the LPC without an official kit. There is also close ups of the D0/hdd/lan points as well.
IPB Image

-PTF



#4 Benni16v

Benni16v

    X-S Enthusiast

  • Members
  • 2 posts

Posted 17 December 2011 - 01:43 PM

I use the Xapt3r solderless adapter so the LPC Port does now exist.
I also have the 3 Pin Adapter (HDD/LAN/D0) - i used a 3 pn connector from an old Notebook Cooler.

I only need to know what i should do with EJECT and RESET and which pin on the X3 is which cable.

Iīm from Germany sorry for my terrible english...




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users