X3 Wire Problem
Posted 15 December 2011 - 10:35 AM
I bought a used X3 chip without anything - just the X3 - no cables no Adapters.
Now i need to solder the 2 cables Reset/Eject.
I donīt know which pin on the X3 is reset and which is eject and where i have to solder it to the Mainboard.
It is a V1.6
Posted 17 December 2011 - 02:31 AM
here is a tutorial for the X3 install: http://teamxecuter.e...st.com/x3ce.pdf IN there you can see all the parts that you need.
you might all ready have that, but just in case, i thought I would link it.
Assuming you really don't have the LPC rebuild kit, there is a post somewhere on here that shows how to build the LPC with wires, but I'll be damned if I can find it right now. Ill try to find it or check my old documentation i saved to get that info.
I wouldn't know where to begin to solve the no reset board though. Someone way smarter than me needs to help with that.
You can also try to buy the reset board and other cables. Here is a website I have used before to buy things and they have a reset board and the D0 cable connector as well:
you might try posting in the xbox1 B/S/T to see if anyone there has the extra parts for sale, as it seems the prices on llama are kind of high if you ask me. Well 5 bucks for the board is fair, but 10 bucks for the D0 wire seems like highway robbery
Posted 17 December 2011 - 05:32 AM
anyway, here is the image of how to rebuild the LPC without an official kit. There is also close ups of the D0/hdd/lan points as well.
Posted 17 December 2011 - 01:43 PM
I also have the 3 Pin Adapter (HDD/LAN/D0) - i used a 3 pn connector from an old Notebook Cooler.
I only need to know what i should do with EJECT and RESET and which pin on the X3 is which cable.
Iīm from Germany sorry for my terrible english...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users