Borderlands 2 Custom Xbox Slim
Posted 29 December 2011 - 09:43 AM
I have not modded a Xbox Slim case yet, but as they are getting real cheap now i thought i would play around with this spare case.
The plan, so far. Is for a Borderlands 2 themed case. I have some ideas but i wont reveal all my secrets straight away.
Stripped it down
Rough designs, i wanted a radius on the corners
Hard Drive Window
Files. These make your job alot easier then trying to sand your edges down smooth.
Top window cut out
When you are marking out your windows, check behind where you will be cutting, it makes it alot easier if you fit your design to the case.
Posted 29 December 2011 - 01:57 PM
Primer on the other side of the Xbox 360 case and other parts.
Posted 29 December 2011 - 08:53 PM
Posted 31 December 2011 - 10:56 PM
Posted 02 January 2012 - 01:28 AM
Posted 02 January 2012 - 10:46 AM
Trying to keep a light coat of paint because of that eject button. If i have problems i will re wire a eject button into the rocks.
Wanted to add some rocks / terrain to the bottom of the case, add a display for the Xbox case. Wrapped the case in some foil and tape to not get any foam on it. Raised the case up a bit from the base to add some height.
I was filming the expanding foam but the camera went flat 10 seconds into the foaming. Real dirty stuff, definatly will be wearing gloves next time, sticks to your fingers real good.
Sony Bloggie. Never will i buy one of Sony's products again. Battery life is terrible. Needs to go in for warrenty.
Posted 02 January 2012 - 12:28 PM
Posted 07 January 2012 - 06:59 AM
Posted 08 January 2012 - 03:56 AM
Spent some time on the expanding foam carving out the rocks, sharp flat edges, they don't seem to have much curves.
I removed the foam and other things from the centre and dropped the case lower, looks better then being raised up so hign. Now the rocks look like they have grow / formed around the case, rather then just the case sitting on the top.
This side looks a bit plain so i thought i would keep the foam / rocks higher.
The rocks are far from finished. It looks like not much has happend, but its hard to see in the photos.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users