Jump to content


Photo

A Little Confused With Connections Nand-x


  • Please log in to reply
6 replies to this topic

#1 dynt

dynt

    X-S Senior Member

  • Members
  • PipPip
  • 242 posts
  • Xbox Version:v1.6b
  • 360 version:v1 (xenon)

Posted 11 January 2012 - 01:52 PM

i just bought a nand-x and gathering as much info as possible before attempting my first jtag
however i am still confused over the connections.
I understand the jtag connections but are the nand connections also needed at the same time to be connected
to the nand -x

#2 cRaCKwHoRe

cRaCKwHoRe

    X-S Senior Member

  • Members
  • PipPip
  • 271 posts
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 11 January 2012 - 02:52 PM

The NAND-X is only used to read/write to the NAND. You don't need it in place once you have flashed your NAND with the hacked NAND image. That's why the NAND-X comes with the pin-headers, so you can plug / unplug it when it is needed.

Hope that helps...

Edited by cRaCKwHoRe, 11 January 2012 - 02:52 PM.


#3 dynt

dynt

    X-S Senior Member

  • Members
  • PipPip
  • 242 posts
  • Xbox Version:v1.6b
  • 360 version:v1 (xenon)

Posted 11 January 2012 - 03:12 PM

QUOTE(cRaCKwHoRe @ Jan 11 2012, 03:52 PM) View Post

The NAND-X is only used to read/write to the NAND. You don't need it in place once you have flashed your NAND with the hacked NAND image. That's why the NAND-X comes with the pin-headers, so you can plug / unplug it when it is needed.

Hope that helps...



on the picture non-xenon install points
there is J2B1, (NAND) J1D2 (NAND)
J2D2 , DB1F1, ROL YELLOW WIRE (JTAG) do all thease need to be connected ??

#4 cRaCKwHoRe

cRaCKwHoRe

    X-S Senior Member

  • Members
  • PipPip
  • 271 posts
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 11 January 2012 - 03:29 PM

QUOTE(dynt @ Jan 11 2012, 09:12 AM) View Post



on the picture non-xenon install points
there is J2B1, (NAND) J1D2 (NAND)
J2D2 , DB1F1, ROL YELLOW WIRE (JTAG) do all thease need to be connected ??


Yes, otherwise you won't be able to read / write to the NAND. Are you using this as your install guide? I would recommend using either the QSB's or the pin header, since you will want to disconnect the NAND-X once you are done reading and writing the hacked image to your NAND.


#5 dynt

dynt

    X-S Senior Member

  • Members
  • PipPip
  • 242 posts
  • Xbox Version:v1.6b
  • 360 version:v1 (xenon)

Posted 11 January 2012 - 03:42 PM

QUOTE(cRaCKwHoRe @ Jan 11 2012, 04:29 PM) View Post

Yes, otherwise you won't be able to read / write to the NAND. Are you using this as your install guide? I would recommend using either the QSB's or the pin header, since you will want to disconnect the NAND-X once you are done reading and writing the hacked image to your NAND.

i got the nand-x kit with the pinheaders and small boards with clip connectors


#6 cRaCKwHoRe

cRaCKwHoRe

    X-S Senior Member

  • Members
  • PipPip
  • 271 posts
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 11 January 2012 - 03:49 PM

QUOTE(dynt @ Jan 11 2012, 09:42 AM) View Post

i got the nand-x kit with the pinheaders and small boards with clip connectors


Yeah, that's the standard kit. I would recommend using the QSB's (quick-solder boards) as they really make for an easy install. It's hard to solder the wrong points with those smile.gif

Use the guide I posted in the previous reply- it will really help!


#7 dynt

dynt

    X-S Senior Member

  • Members
  • PipPip
  • 242 posts
  • Xbox Version:v1.6b
  • 360 version:v1 (xenon)

Posted 11 January 2012 - 03:54 PM

QUOTE(cRaCKwHoRe @ Jan 11 2012, 04:49 PM) View Post

Yeah, that's the standard kit. I would recommend using the QSB's (quick-solder boards) as they really make for an easy install. It's hard to solder the wrong points with those smile.gif

Use the guide I posted in the previous reply- it will really help!

many thanks for your help




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users