Gpu Reball Service & Other Rrod Repair
Posted 14 January 2012 - 11:38 PM
Offering Reball or Chip Re-pinning to those who need it.
Can do a Reball to the various Chips on the Phat 360: GPU, CPU, HANA, Southbridge and RAM. Using Leaded spheres.
As for the Slim: if the stencils carry over for the same design - then we are good to go.
Common chips that need Reballing are usually the GPU and sometimes the Southbridge
So - if you are interested or curious please send me a personal message or reply post. I usually come to this message board site daily. Let me know in detail the problem your 360 is experiencing.
Can handle a few other RROD issues like the 0001 and 0002. Also can replace certain parts of the DVD drive.
360 consoles will most likely have to be mailed to me. I live near Des Moines in the state of Iowa. Usually I can send a bubble wrapped 360 thru Postal Priority for 10.95
So - contact me for questions or to get the process started.
Posted 19 January 2012 - 05:20 AM
Posted 29 January 2012 - 03:41 PM
Posted 31 January 2012 - 10:43 AM
Medium Flat Rate Priority was 10.95 - now 11.35
Best way to ship 360s for the price and the speed.
Entire console fits in the box, even with bubble wrap
Posted 04 February 2012 - 10:15 AM
members of Xbox scene that I have recently helped:
albcool - GPU reball - has his 360 back in his possession
juvix8888 - beat a 0002 for him on one job & on the second one: resolved a No Power with sub component replacement, plus the HANA was reballed to correct a E74
Three more people from Xbox Scene are sending their consoles to me. Let you know the results when those are done.
Posted 13 March 2012 - 11:25 PM
These are Xbox scene members that I have helped
DeVante - needed a GPU Reball for his jtagged system - Completed
effbee05 - also needed a GPU reball - plus a reflow was done to the CPU - Completed
albcool - another GPU reball - job was completed - But issues with a Nand flash are now giving the system and E79 - I DID NOT DO the NAND FLASH - that was prior to my work
youngD765 - needed a GPU reball - sadly, job couldn't be completed ... the CPU chip was fried
Currently doing a project for ShadowGuy ... he wants more RAM installed to his Jasper board
Posted 19 March 2012 - 03:12 AM
Posted 21 March 2012 - 10:40 AM
I installed 4 Ram chips to the bottom of his Jasper board. He wants a Gig of Ram to his system
ShadowGuy will have to make some adjustment to his system on his end. Looks like the Nand/Cpu need to be acclimated to the new amount of available ram
Currently working on 3 other systems for two different Xbox scene members. Two are for Gpu reball. And one is for correcting a 0002
The 0002 is already done actually
Edited by wilgo45, 21 March 2012 - 10:47 AM.
Posted 24 March 2012 - 12:16 AM
Those 3 other 360's that I previously mentioned - more Xbox scene members. Two belong to Jcb890 and one to ksuhumpy.
Jcb890 - had one system that was 0002 - and the other 0110
I have already repaired the 0002 situation. Currently working on the 0110
ksuhumpy - a 360 that needs a Gpu reballing and the Dvd drive thoroughly cleaned. I am part way thru this job
Posted 24 March 2012 - 09:22 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users