Jump to content


Photo

Gpu Reball Service & Other Rrod Repair


  • Please log in to reply
113 replies to this topic

#1 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 14 January 2012 - 11:38 PM

Hello

Offering Reball or Chip Re-pinning to those who need it.

Can do a Reball to the various Chips on the Phat 360: GPU, CPU, HANA, Southbridge and RAM. Using Leaded spheres.

As for the Slim: if the stencils carry over for the same design - then we are good to go.

Common chips that need Reballing are usually the GPU and sometimes the Southbridge

So - if you are interested or curious please send me a personal message or reply post. I usually come to this message board site daily. Let me know in detail the problem your 360 is experiencing.

Can handle a few other RROD issues like the 0001 and 0002. Also can replace certain parts of the DVD drive.

360 consoles will most likely have to be mailed to me. I live near Des Moines in the state of Iowa. Usually I can send a bubble wrapped 360 thru Postal Priority for 10.95

So - contact me for questions or to get the process started.

#2 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 19 January 2012 - 05:20 AM

just adding a comment line to send this posting back to the starting page

#3 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 23 January 2012 - 09:13 AM

bump bump

#4 effbee05

effbee05

    X-S Senior Member

  • Members
  • PipPip
  • 266 posts
  • Xbox Version:v1.0
  • 360 version:v5.0 (360S - trinity)

Posted 29 January 2012 - 03:41 PM

What are your prices? I have one Jtag Zephyr that needs the GPU replaced (it's warped) and another Zephyr that probably just needs reballing.

#5 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 31 January 2012 - 10:43 AM

United States Postal has just raised their rates

Medium Flat Rate Priority was 10.95 - now 11.35

Best way to ship 360s for the price and the speed.

Entire console fits in the box, even with bubble wrap

#6 youngD765

youngD765

    X-S Enthusiast

  • Members
  • 0 posts

Posted 01 February 2012 - 11:12 PM

PM'ed

#7 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 04 February 2012 - 10:15 AM


members of Xbox scene that I have recently helped:

albcool - GPU reball - has his 360 back in his possession

juvix8888 - beat a 0002 for him on one job & on the second one: resolved a No Power with sub component replacement, plus the HANA was reballed to correct a E74


Three more people from Xbox Scene are sending their consoles to me. Let you know the results when those are done.

#8 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 10 February 2012 - 11:12 PM

time for another bump

#9 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 13 March 2012 - 11:25 PM

hey - offering details on some more Xbox 360 repair jobs

These are Xbox scene members that I have helped

DeVante - needed a GPU Reball for his jtagged system - Completed

effbee05 - also needed a GPU reball - plus a reflow was done to the CPU - Completed

albcool - another GPU reball - job was completed - But issues with a Nand flash are now giving the system and E79 - I DID NOT DO the NAND FLASH - that was prior to my work


youngD765 - needed a GPU reball - sadly, job couldn't be completed ... the CPU chip was fried


Currently doing a project for ShadowGuy ... he wants more RAM installed to his Jasper board

#10 effbee05

effbee05

    X-S Senior Member

  • Members
  • PipPip
  • 266 posts
  • Xbox Version:v1.0
  • 360 version:v5.0 (360S - trinity)

Posted 17 March 2012 - 01:20 AM

My old Zephyr is working fine! Thanks!

#11 ksuhumpy

ksuhumpy

    X-S Enthusiast

  • Members
  • 3 posts

Posted 19 March 2012 - 03:12 AM

Console should ship tomorrow. Looking forward to getting an old Xenon JTAG working again.

#12 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 21 March 2012 - 10:40 AM

Project for ShadowGuy is finished

I installed 4 Ram chips to the bottom of his Jasper board. He wants a Gig of Ram to his system

ShadowGuy will have to make some adjustment to his system on his end. Looks like the Nand/Cpu need to be acclimated to the new amount of available ram


Currently working on 3 other systems for two different Xbox scene members. Two are for Gpu reball. And one is for correcting a 0002

The 0002 is already done actually

Edited by wilgo45, 21 March 2012 - 10:47 AM.


#13 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 708 posts

Posted 24 March 2012 - 12:16 AM

hey again

Those 3 other 360's that I previously mentioned - more Xbox scene members. Two belong to Jcb890 and one to ksuhumpy.

Jcb890 - had one system that was 0002 - and the other 0110

I have already repaired the 0002 situation. Currently working on the 0110

ksuhumpy - a 360 that needs a Gpu reballing and the Dvd drive thoroughly cleaned. I am part way thru this job

#14 ShadowGuy

ShadowGuy

    X-S Member

  • Members
  • Pip
  • 135 posts
  • Location:Texas
  • Xbox Version:v1.0
  • 360 version:v4.0 (jasper)

Posted 24 March 2012 - 09:22 PM

Did a great job for a project of mine. Very professional and did a fantastic job at staying in contact.

#15 edcheese

edcheese

    X-S Young Member

  • Members
  • Pip
  • 51 posts

Posted 24 March 2012 - 10:50 PM

Interested in a HANA reball... PMd you.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users