Jump to content


Photo

3151 351f B380 0402 C000 0001 Code On Xbox360


  • Please log in to reply
15 replies to this topic

#1 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 18 February 2012 - 06:30 AM

My friends brother supposedly "found 2 xbox360s in the trash" Neither worked. ONe wouldn't read any disk that you put into it. I seem to have fixed that one by simply doing an update on it from a flash drive.

The second one gives this error upon startup.... Error fails then it says this code ...3151 351f b380 0402 c000 0001 From my googling it seems that someone either tried modding it and failed, or tried swapping the dvd drive in it, and also failed. The only solution suggestion that I found was to try the update from a flash drive but that doesn't even try to do that update. It also won't sync up with a controller but that may be because it's all messed up either way.

I'm wondering if anyone has any suggestions on this. I haven't been in the "modding scene" since the original xbox.(which I still use as my media center).

Any help is appreciated.

( I also apologize if this is in the wrong section.)

Edited by nemesis123321, 18 February 2012 - 06:31 AM.


#2 wilgo45

wilgo45

    X-S Expert

  • Members
  • PipPipPip
  • 701 posts

Posted 18 February 2012 - 01:03 PM

hey

The first one that won't read discs - that's an easy fix if you know what to do. Replacement of the spindle motor or the laser.

The second one with the chain code error. That one has had a flashed drive. So it has semi illegal firmware added to it. The new games that Microsoft puts out, the updates on them - look for Modded Ware. If it detects them - then it boxes the drive.

Games like MW3 are sending alot of flashed console into errorville. If those people didn't update their firmware.

So you have to find someone who flashes drives. With that one, they have to flash it back to stock and maybe re-flash it once again with a newer version.

juvix8888 - might be able to help you

#3 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 18 February 2012 - 07:53 PM

all he has to do with the error code one is find the specific update it crashed on and run it from usb, try all the update files u can get from teh program updatespy.

#4 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 19 February 2012 - 01:50 AM

QUOTE(wilgo45 @ Feb 18 2012, 01:03 PM) View Post

hey

The first one that won't read discs - that's an easy fix if you know what to do. Replacement of the spindle motor or the laser.

The second one with the chain code error. That one has had a flashed drive. So it has semi illegal firmware added to it. The new games that Microsoft puts out, the updates on them - look for Modded Ware. If it detects them - then it boxes the drive.

Games like MW3 are sending alot of flashed console into errorville. If those people didn't update their firmware.

So you have to find someone who flashes drives. With that one, they have to flash it back to stock and maybe re-flash it once again with a newer version.

juvix8888 - might be able to help you



So I can simply reflash the dvd drive to factory specs and it will work? I read that swapping in an unmodded dvd drive will allow it to finish the update is there any truth to that?

QUOTE(iateshaggy @ Feb 18 2012, 07:53 PM) View Post

all he has to do with the error code one is find the specific update it crashed on and run it from usb, try all the update files u can get from teh program updatespy.


The particular error code ending in c000 0001 says to call microsoft on their website.

#5 sinclairuser

sinclairuser

    X-S Senior Member

  • Members
  • PipPip
  • 163 posts
  • Xbox Version:v1.6
  • 360 version:v3.0 (falcon)

Posted 19 February 2012 - 04:47 AM

QUOTE(nemesis123321 @ Feb 19 2012, 12:50 AM) View Post

I read that swapping in an unmodded dvd drive will allow it to finish the update is there any truth to that?
The particular error code ending in c000 0001 says to call microsoft on their website.

to swap the drive it needs the same model and its drivekey its more complicated than that it depends which drive it is this probably happened due to a spoofed drive



Edited by sinclairuser, 19 February 2012 - 04:48 AM.


#6 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 19 February 2012 - 05:07 AM

the drive is already flashed, no need to do shit to it. just find the right update and finish the job from usb. in a few rare cases, the drive requires flashing again, but it is rare. if it crashes on teh next update, u know what to do.

#7 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 19 February 2012 - 06:07 AM

QUOTE(iateshaggy @ Feb 19 2012, 05:07 AM) View Post

the drive is already flashed, no need to do shit to it. just find the right update and finish the job from usb. in a few rare cases, the drive requires flashing again, but it is rare. if it crashes on teh next update, u know what to do.



How would I find the right update though? I have no clue as to what game did this or anything like that. I'm all ears. Like I stated I haven't been into this stuff in a while.

#8 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 19 February 2012 - 06:24 AM

look for a program "updatespy". try all the updates u can get from it.

#9 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 19 February 2012 - 07:11 AM

So just extract them to a fat32 flash drive and try updating the console. any particular order or just start randomly trying?

#10 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 19 February 2012 - 07:38 AM

when u find the right one, you'll know.

#11 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 19 February 2012 - 07:49 AM

QUOTE(iateshaggy @ Feb 19 2012, 07:38 AM) View Post

when u find the right one, you'll know.



Ok well as of right now I've tried 4 different ones and neither even attempt to start. I know I'm making them right because they work on the other 360 I have. Those when I put in the flash drive and turn it on they ask if I want to do the update. This one does nothing. The light on the flash drive turns on but that's about it.

Does this tell you anything in particular?

#12 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 19 February 2012 - 08:40 AM

you havent done the right update yet. unplugging the dvd drive might also give u better results but can reveal worse problems. does this console have hdmi?

#13 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 19 February 2012 - 08:44 AM

Yes It does have HDMI. I also currently can not sync it with a controller. Is that normal for when they are getting this error?

#14 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 24 February 2012 - 07:45 AM

Downloaded updatespy like suggested and tried all the updates that it had. None of them appeared to do anything or even attempt.

#15 nemesis123321

nemesis123321

    X-S Member

  • Members
  • Pip
  • 70 posts
  • Location:Delavan, WI
  • Xbox Version:unk
  • 360 version:unknown

Posted 25 February 2012 - 04:36 AM

Ok well I have some more information on this. It appears to have a Samsung DVD driver in it and it is an HDMI console with what appears to be a non HDMI case. (they cut out a hole very poorly for the HDMI port). I'm assuming they "spoofed" this drive to work on this console and then did an update with a newer game. I'm wondering if there is any way to find out what drive was in this console originally and what is the quickest way of getting this working again?




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users