Not Boot Xell (no Signal) Xbox Trinity/slim Coolrunner
Posted 19 February 2012 - 01:11 AM
I have moded my Xbox with The coolrunner and nand-x.
1. Read nand twice and compare it
2. Created The ccs
3. Programed The coolrunner
4. Wired the coolrunner
5. programd the controller with The ccs
Booted up my box but no signal
Cooleunner power led is turned on and one is blinking..
What could be The problem to look into?
If i disconect The coolrunner and flash back The nand my Xbox wil boot.
Posted 19 February 2012 - 02:20 AM
Posted 19 February 2012 - 10:54 AM
I have used 360_Multi_Builder_v0.4 to create this file with option 1 and flased it with nand pro 3
have found a new version 0.7 .. but same result
- 1 Coolrunner LED burns
- 1 Coolrunner LED blinks
- Led from colsole burns also
No signal/booting on TV with AV cable.
Coolrunner switches are on Slim and Normal (have bin there all the way) have also switched the switched to phat ans slim ..
Edited by jgcramer, 19 February 2012 - 11:15 AM.
Posted 21 February 2012 - 07:07 PM
Normal boot takes aprox 1minute i have seen that i have to modify The wirering places...
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users