Jump to content


Photo

Xnandhealer 0.75


  • Please log in to reply
No replies to this topic

#1 TingedAce

TingedAce

    X-S Senior Member

  • Dev/Contributor
  • PipPip
  • 179 posts
  • Location:Scotland
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 21 February 2012 - 01:48 AM

** XNandhealer updated to 0.75 **
(Supports dash 14699, multibuilder 0.7)

Download:
here

Summary:

Added two new types of bad block remapping tasks. Now there are 3 categories:
1. specify an image with bad blocks as a template, and apply the same remapping to a clean image
2. take an image with bad blocks and create a copy with the relocated blocks back in their original locations
3. take a clean image and create a copy, specifying which blocks to remap and where to put them

IPB Image

Added check to see if image contains ecc. Reported as 'e' icon on main tab and also in Info tab.

IPB Image

Added check so you can't accidentally overwrite fuses.txt when reading CPU key over LAN

Added check for block 0x02 relocation so CB can still be correctly read for Info tab data

Now reports bad blocks even if they donít appear to be remapped anywhere (e.g. 0x1F3 -> ????)

Removed dependency on nandpro 2.0b. All functions will work properly with any version.

Enjoy smile.gif




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users