Jump to content


Photo

9504 Drive Won't Read Games Anymore After Flashing


  • Please log in to reply
5 replies to this topic

#1 kaner74

kaner74

    X-S Enthusiast

  • Members
  • 25 posts

Posted 29 February 2012 - 01:02 PM

Something went wrong when i flashed 9504 drive using Jf 1.92 .. first i grab the key using the slimkey and i got the dummy.bin , then i did the kamikaze hack using the dremel.. all went good the drive unlocked .. i forgot to read the original firmware.. i only has the dummy.bin .. i flashed it with Lt 3.0 0225 frimware .. and then i locked the drive ..Flashing and writing were succsesfull ... when i try to play a game a black screen came i hear the disk spinning for 5sec and then back to dashboard.. i tried backups and even retail disks with no success..
it only play movies ...
is there someone got these experience??.... I already flashed drives before but this one went wrong

please help

#2 dougiegillam

dougiegillam

    X-S Senior Member

  • Members
  • PipPip
  • 218 posts
  • Location:North Wales.UK
  • Interests:Computing,cycling, running
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 29 February 2012 - 01:29 PM

QUOTE(kaner74 @ Feb 29 2012, 02:02 PM) View Post

Something went wrong when i flashed 9504 drive using Jf 1.92 .. first i grab the key using the slimkey and i got the dummy.bin , then i did the kamikaze hack using the dremel.. all went good the drive unlocked .. i forgot to read the original firmware.. i only has the dummy.bin .. i flashed it with Lt 3.0 0225 frimware .. and then i locked the drive ..Flashing and writing were succsesfull ... when i try to play a game a black screen came i hear the disk spinning for 5sec and then back to dashboard.. i tried backups and even retail disks with no success..
it only play movies ...
is there someone got these experience??.... I already flashed drives before but this one went wrong

please help

Looks like you used the wrong firmware! You should have used 0272 and not 0225, all 9504 drives after dashboard 13146 are 0272 f/w.

#3 kaner74

kaner74

    X-S Enthusiast

  • Members
  • 25 posts

Posted 29 February 2012 - 04:53 PM

QUOTE(dougiegillam @ Feb 29 2012, 01:29 PM) View Post

Looks like you used the wrong firmware! You should have used 0272 and not 0225, all 9504 drives after dashboard 13146 are 0272 f/w.



Is it possible to flash to 0272 firmware now with the dummy.bin because i tried and it will fail to write

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4682mS

Write verified OK !

Restoring sector 0x3E000.

Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorisation Failed!
Restore Verify Failed !

I can't write Lt3.0 0272 firmware on 0225 that i have on dummy.bin



#4 hardie

hardie

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,049 posts
  • Location: Australia
  • Xbox Version:none
  • 360 version:v1 (xenon)

Posted 29 February 2012 - 11:13 PM

what drive revision shows on the outer casing ?
what drive properties show in jf when plugged in ?
before you flashed this drive if it showed 9504 on the case but 0225 in jf you need the 0225u cfw
if it showed 9504 on the case and 9504 in jf you need the 0225 cfw
so which is it?
you go on about 0272 but havent given full log so which one do you need -- 0225 or 0272 ???

#5 kaner74

kaner74

    X-S Enthusiast

  • Members
  • 25 posts

Posted 01 March 2012 - 01:23 PM

QUOTE(hardie @ Feb 29 2012, 11:13 PM) View Post

what drive revision shows on the outer casing ?
what drive properties show in jf when plugged in ?
before you flashed this drive if it showed 9504 on the case but 0225 in jf you need the 0225u cfw
if it showed 9504 on the case and 9504 in jf you need the 0225 cfw
so which is it?
you go on about 0272 but havent given full log so which one do you need -- 0225 or 0272 ???





ok problem solved.. it is labelled 9504 on the case.. i was using the wrong firmware 0225u......
with the 0225 all seems to work fine

thanks for your suuport

#6 FrankDux

FrankDux

    X-S Senior Member

  • Members
  • PipPip
  • 274 posts

Posted 21 April 2012 - 05:23 PM

ignore my post

Edited by FrankDux, 21 April 2012 - 05:39 PM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users