Jump to content


Photo

How Can I Read My Nand From Xell?


  • Please log in to reply
3 replies to this topic

#1 TrueLion

TrueLion

    X-S Enthusiast

  • Members
  • 11 posts

Posted 08 March 2012 - 12:34 PM

Hello , I have a little problem.
Just flashed my nand with new feeboot 14719.probably a new bad block formed in the writing process because my xbox360 boot only the 360 logo and the first white screen, it said that my profile is logged by the dash won' t appear and I con' t do almost anything.
The good new is that xell boot.
I think I must read my nand from xell, remap the new bad block and finally rewrite the nand.But how can I do?What program I must use?

#2 Dicko316

Dicko316

    X-S Senior Member

  • Members
  • PipPip
  • 215 posts
  • Xbox Version:none
  • 360 version:v5.0 (360S - trinity)

Posted 08 March 2012 - 01:04 PM

Boot without a hdd attached and see if it boots, it probably a dashlaunch problem.

If it is create a new image with different settings in the dashlaunch launch.ini.

But as you asked to read your nand, boot to Xell, connect it also to ethernet, then using your pc use firefox to goto the ipaddress of the xbox, then dowload the nand from there.

To sort out bad blocks just open in 360flashtool or similar program and it will show the bad blocks. Then either manually handle it or create a new image using that new dumper nand image as the source for the new image.

To flash better try this.
Boot to FSD or load xexmenu. Then once inside FSD/xexmenu load up a program called Flash360v1.0, it can read and wite to your nand, it writes in a different way to rawflash so you dont get as many errors.

Hope this helps

#3 TrueLion

TrueLion

    X-S Enthusiast

  • Members
  • 11 posts

Posted 08 March 2012 - 02:43 PM

Thanks Dicko.
In the image I have created there is no dash launch because I wanted to install it later.( in xebuild 2.02 I had deflagged dashlaunch install option).

For writing the image I have had always used flash360v1 , This time I used nand flasher and this is the result mad.gif . Better return to the old glories I think.

#4 Farid

Farid

    X-S Young Member

  • Members
  • Pip
  • 55 posts
  • Location:Iran
  • Xbox Version:none
  • 360 version:v4.0 (jasper)

Posted 10 March 2012 - 02:44 PM

Personally I use :

rawflash_v4.zip for writing nand --> xenon.elf and nanddump.bin at root of USB flash memory --> Eject button for xell --> writing nand

nand_flasher_360_xbox360_v1_2_0.rar for reading nand --> XeXMenu_v1.1-LIVE.rar --> default.xex --> Read Nand





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users