Jump to content


Photo

Xmugen 2 Player Help


  • Please log in to reply
4 replies to this topic

#1 elios_kenni

elios_kenni

    X-S Enthusiast

  • Members
  • 19 posts

Posted 13 March 2012 - 02:04 PM

I am trying to play Xmugen on my Xbox 2 players but cannot get it to work. I have been using this walkthru that I have found on here but it does not work. Xmugen just doen't read the other controller plugged in.

This is the walkthru I used and could not get 2 players to work any advice will be greatly appreciated.

QUOTE

[Input]
P1.UseKeyboard = 1
P2.UseKeyboard = 1
;Joystick type:
;0 - Disable
;1 - Autodetect (not reliable under DOS)
;4 - 4 button
;6 - 6 button
;8 - 8 button
;20 - Sidewinder
;21 - SNESKey
;22 - PSX pad
;23 - N64 pad
P1.Joystick.type = 0
P2.Joystick.type = 0
ForceFeedback = 0 ;True to enable force feedback

i CHANGED THE BOLD PART TO 1, THEN I COPIED THE BUTTON CONFIGURATION I HAD FOR CONTROLLER 1 AND PASTED IT ON CONTROLLER TWO SO THEY WOULD BE IDENTICAL.

[P1 Joystick] ;Default config
Jump = 1
Crouch = 2
Left = 3
Right = 4
A = 11 ;5
B = 10 ;6
C = 6 ;9
X = 12 ;7
Y = 9 ;8
Z = 8 ;10
Start = 13

[P2 Joystick] ;Default config
Jump = 1
Crouch = 2
Left = 3
Right = 4
A = 11 ;5
B = 10 ;6
C = 6 ;9
X = 12 ;7
Y = 9 ;8
Z = 8 ;10
Start = 13

AFTER LOADING MUGEN WITH MY PLAYER 2 CONTROLLER..."I FIND THAT WAS THE ONLY WAY THE TWO CONTROLLERS DIDNT LOCK UP"....I FOUND THAT IT CONTROLLED BOTH PLAYER 1 AND TWO (CONSEQUENTLY MUGEN WOULD MOVE 2 SPACES FOR EVERY TIME I PRESSED DOWN ONCE".....AFTER THIS I WENT INTO THE MUGEN INPUT OPTIONS WITHIN THE GAME.......SELECTED THE "CONFIG ALL" UNDER PLAYER 2........THIS IS WHEN I PICKED UP MY OTHER CONTROLLER...AND PUT IN THE THE BUTTONS. AFTERWARDS I HIT ESCAPE.......THE PLAYER ONE CONTROLLER NO LONGER CONTROLLED BOTH PLAYER 1 AND 2. tHEY WERE INDEPENDENT OF EACH OTHER.
tHEN I WENT TO VS MODE....AND IT WORKED..I HAD TWO CHARACTERS...FIGHTING EACH OTHER USING TWO DIFFERENT CONTROLLERS

ABOVE YOU HAVE THE 2ND MUGEN CONFIG I HAD (THE FIRST WAS THE ORIGINAL BEFORE I COPIED PLAYER 1 TO PLAYER 2)....i SAVED MY NEW MUGEN CONFIG(CONFIG NUMBER 3 NOW)....AND HERE IS WHAT IT SAYS....

; P1 Key config (configurable from M.U.G.E.N)
[P1 Keys]
Jump = 30
Crouch = 17
Left = 16
Right = 31
A = 51
B = 40
C = 38
X = 52
Y = 53
Z = 39
Start = 28

; P2 Key config (configurable from M.U.G.E.N)
[P2 Keys]
Jump = 72
Crouch = 80
Left = 75
Right = 77
A = 74
B = 78
C = 156
X = 69
Y = 181
Z = 55
Start = 81

[P1 Joystick] ;Default config
Jump = 14
Crouch = 16
Left = 17
Right = 15
A = 5 ;5
B = 7 ;6
C = 6 ;9
X = 8 ;7
Y = 10 ;8
Z = 9 ;10
Start = 11

[P2 Joystick] ;Default config
Jump = 46
Crouch = 48
Left = 49
Right = 47
A = 37 ;5
B = 39 ;6
C = 38 ;9
X = 40 ;7
Y = 42 ;8
Z = 41;10
Start = 43

NOTICE THE NUMBERS UNDER PLAYER TWO....ITS IN THE THIRTIES AND 40S......NOW..IN THEORY...IF YOU ALL HAVE 2 CONTROLLER S'S LIKE I HAVE..YOU CAN JUST USE MY MUGEN.CFG.....OTHERWISE MY LITTLE METHOD SHOULD WORK........YOU ONLY HAVE TO DO IT ONCE......AFTERWARDS....PLAYER ONE AND 2 WILL ALWAYS WORK....






#2 elios_kenni

elios_kenni

    X-S Enthusiast

  • Members
  • 19 posts

Posted 14 September 2012 - 09:14 PM

I still haven't gotten this to work 2 players. So still looking for help.

#3 Nextelhalo

Nextelhalo

    X-S X-perience

  • Members
  • PipPip
  • 473 posts
  • Location:ATX
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 16 September 2012 - 08:55 AM

What build of Xmugen do you have?

#4 mtrf

mtrf

    X-S Enthusiast

  • Members
  • 21 posts

Posted 24 September 2012 - 01:44 AM

Xmugen only works with S-Controllers:
http://www.deafgamer...ntroller_s1.jpg
are you sure both of your controllers are of these kind ?
PS: "illegal imitations" of that controller don't work on Xmugen.

#5 Nextelhalo

Nextelhalo

    X-S X-perience

  • Members
  • PipPip
  • 473 posts
  • Location:ATX
  • Xbox Version:v1.4
  • 360 version:v4.0 (jasper)

Posted 24 September 2012 - 01:45 AM

That is not true. I use wireless logitech controllers when playing xmugen and they work just fine, in fact most controllers will work just fine. Maybe a few out there will not.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users