Posted 29 March 2012 - 07:42 PM
I dont know how to correct the problem or go about in working on it.
Could it be that the hybrid plate is over tighten and somehow popped one of the SMD resistor on the bottom of the board or did i somehow burn out something on the board or power supply.
I dont have another or i would see if it was my powersupply
Help is needed
Posted 29 March 2012 - 08:55 PM
I guess thats where im having the power issue at. Ill see if i can soulder that and see if it resolves the power e03 issue.
Edited by pepito01226, 29 March 2012 - 09:21 PM.
Posted 30 March 2012 - 01:41 AM
I've never found one yet that was the Power suppy brick. More likely a bridge pin under the power core gird of the Cpu chip. And can potentially be a missing surface mount device - just depends on which one
One 0003 that I was working on - corrected once I took the motherboard out of the RF cage. Something on the bottom of the Mobo was grounding against the cage
Power Regs or Caps can also be a culprit. If anyone has applied a heatgun to your Cpu chip, it can cause the Capacitors surrounding it to bulge.
As Power Supply Bricks - the LED is a good indicator of working status. When plugged into a wall socket, if LED is continually Red or not lit - there is a problem
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users