Duox2 Bios On Bank 0 Messed Up And Bank 1 Empty
Posted 13 May 2012 - 06:25 PM
if your booting from a softmod you need to put the chip on the lpc header before you can flash it..
I would personaly do that when i see that its starting to boot the softmod bios should have been loaded to memory by then. The chip has to be connected fully so its probably best to have d0 connected and bt connected to ground on the chip so its always on. then when the xbox starts to boot properly attach the chip to the lps header,
then just flash as norma. (with the correct 1.6 bios)
Posted 14 May 2012 - 07:20 AM
Edited by bentheman, 14 May 2012 - 07:22 AM.
Posted 14 May 2012 - 02:25 PM
So you may want to strap bt to ground or pin 1 on the quick soler points on the chip.
(i think its pin 1, souble check that)
then the chip is always on and not dependant on a bt signal from a diferent button press.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users