Medal Of Honor Warfighter Ammo Box 360
Posted 02 June 2012 - 01:49 PM
New project for the month, this will be based on Medal of Honor: Warfighter developed by Danger Close and published by EA.
The Xbox 360 motherboard will be placed inside an Ammunition Box
I have done this before, but used two ammo boxes that were stacked on top of another. I was happy how this turned out, but I know there was plenty of room for improvements, This time going for a cleaner, single box look with a theme.
The ammunition box will need to be shortened in length as it is too long
Controller compared in size to the case
I removed the rubber seal around the lid, these cases are watertight the handles are tight on this case and its not something I want to struggle with opening and closing the case.
Some of these designs will be re done on the case once finished, as well as some Medal of Honor based text and designs
Perfect condition inside the case
Medal of Honor Facebook
Medal of Honor Twitter
Medal of Honor Youtube
Posted 02 June 2012 - 06:55 PM
Looking forward to your progress,....keep us updated
Posted 03 June 2012 - 07:44 AM
There is a few Youtube videos showing how to take apart the Xbox 360 S. Ill show some basic pictures of opening the case.
Pry open the top grill
Top and bottom surround
Take care when taking the faceplate off as there is a ribbon cable that will easily tear.
Drilling out each of the small welds on the support bar, wanted a cleaner look on the case
Pry it up and the bar should remove easily, with minimal damage to the case
Posted 03 June 2012 - 10:56 AM
Sanded back the lid and a coat of primer
Posted 05 June 2012 - 01:13 PM
Thin coat of filler
Posted 05 June 2012 - 04:50 PM
Posted 09 June 2012 - 08:08 PM
There's a much easier way to open back part of a slim - apply pressure with a thumb on either side and it pops apart! Try it out..
Ive tried that method. It never works for me...
To open the inner tab where you have the 2 screw drivers remove the lower service tag to reveal a small pin hole where you can push a paper clip through and open the hard to get to tab..
Posted 16 June 2012 - 04:36 PM
Etch Primer on bare metal then finished in Primer
Motherboard will be mounted with some stand off's, will drill and tap these into the case. The disc drive will be opening and closing inside this case, not going to make it come out the top or side this time. Maybe next time on a better sized ammo box I will try this again.
There will be space for a controller and game cases inside. Store everything you need to play.
Posted 17 June 2012 - 09:07 AM
Posted 14 September 2012 - 11:28 AM
I was lucky enough to get invited to a preview event of Medal of Honor Warfighter at EA headquarters in Sydney, we got to play some early code of the game, and it was impressive, the game i have been looking forward too. A mix between Call of Duty's fast pace and more open maps of Battlefield.
Perfect mix for a great game.
Front USB ports and 3 switches for Power, sync and eject
Rubber Grommet at the back of the case, able to fit the power cable, HDMI and Kinect cables.
Engraved badges with Medal of Honor text, with the EA and Danger Close logos.
Just fits with some modification of the top lid.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users