Tsop Flashing With Ndure 3.1/ Hexen Disc
Posted 01 July 2012 - 07:36 AM
I've decided to tsop flash my xbox: I just haven't been able to find a modchip or mechassault/007 to mod my xbox. I've seen that you can softmod with ndure 3.1 using hdd hotswapping. I'm just not sure how to go from that to tsop flashing. Afteer that, I want to make up a new hdd with slayers 2.7 or the hexen disc.
I have a v 1.2 pal translucent green (stock) xbox.
Posted 01 July 2012 - 02:08 PM
Posted 01 July 2012 - 02:26 PM
It's easy. Softmod the Xbox, solder the TSOP points, install the new dash (at C:\evoxdash.xbe), flash the TSOP. HeXEn does all of that for you.
Thanks, I've found all the tutorials I need now. I have a few more questions though:
-I'll be using a 250gb ata hdd, should i flash iND-BIOS.5003.67 or X2.4981.67?
-after this, I'll be trying to tsop a xbox with compact flash hdd and no dvd. What bios would you recommend? I'd have it output vga with internal sync signals. I can force vga output with the heXen disc, right?
Posted 01 July 2012 - 05:19 PM
I don't know about the VGA stuff...
Posted 06 July 2012 - 11:09 PM
Posted 06 July 2012 - 11:58 PM
Posted 06 July 2012 - 11:59 PM
the ones i edited will flash from hard disk. But if you edited it your self you need to reference the bios locations excetera.. "unless it was the very 1st release i made which is no longer available any where on the internet"
but I SERIOUSLY recomend using the DVD version that was released by Heimdall, unless you have no working dvd drive.
I only edited the thing so people with slim boxes or no working dvd drive could access some of the features.
Its no where near as functional as the dvd version, neither is it as safe, I have blanked out a lot of the options. So if yours dosent say "DO NOT USE THIS" for some options. then its not the one you should be using if you dont have a dvd drive.
also are your tsop points solderd.
what tsop chip do you have..
if your using hexen to flash a winbond you need an official xbox controller gentoo dosent seem to like unofficial ones..
what errors do you get
"lots of questions"
Edited by shambles1980, 07 July 2012 - 12:06 AM.
Posted 07 July 2012 - 04:41 PM
I have a ST tsop chip and soldered the 2 unlock points on the top of the xbox.
I used shambles hexen on hdd (latest version, no modifications) to update the krayzie softmod to 1.1.1, but i got an error saying my xbox didn't have a krayzie softmod?
I then tried to tsop flash via krayzie, but to no avail. I then used the 'incomplete flash cleanup' to repair that mistake.
I hope this clears it all up
Posted 07 July 2012 - 07:08 PM
Try flashing the TSOP by loading HEXEN from disc
Posted 07 July 2012 - 08:35 PM
Posted 09 July 2012 - 03:22 AM
if it dosent work for end users "although most confirm it does" Then its absolutley pointless..
i cant link to the one i uploaded but id really like to confirm it really is the correct version..
it should have XBMC 3.1 with icefilms plugin already isnatlled if you install xbmc from it..
I just re downloaded the latest version i uploaded, and tried it..
had no problems flashing an xbox..
do you have a winbond chip or something??
I havent tested it for a winbond chip. prehaps i need to edit some more files. although gentoo is already set up to flash from hard disk as a default you just tell hexen which bios to move where.. so it should not be an issue with that either...
Edited by shambles1980, 09 July 2012 - 03:35 AM.
Posted 09 July 2012 - 02:42 PM
Posted 09 July 2012 - 02:56 PM
HeXEn doesn't care about your current softmod when upgrading to Krayzie 1.1.1 using - it installs a completely new and clean version from scratch.
Posted 09 July 2012 - 04:30 PM
I know it seems to move stock files about "i think it moves them to E:\backup" but the only way i can get the updated dash on to C is to manualy move them from D:\stock files to C:\
I know its suposed to update the dash and then do the soft mod. But i dont think that it actualy does..
Thats why i usually do a minimal install softmod, "splinter cell krazies ndure 1.1.1" and then boot hexen, manualy copy over stock files from the stock files folder to C: and then install the softmod again... "i prefer the unlesh x dash that comes with hexen compared to the SC exploit files i have.
Dont know why i have to do it like that. but its the way i do it. "ive had it be unable to install due to dash version being to low.. "
so i just play it safe with the manual transfer..
As for halo 2 game update..
You have to start the game then go to xbox live and tell it to connect it will then update from the dvd.
if your already softmodded and have a shaddow C it wont be able to do it. so you would either need to dissable shaddow c. and then do it "leaving you back at a stock xbox" which you could then re soft mod.
or manually do it.
Im wondering if there was more than 1 revision of hexen. and if one of them did not update the stock files before soft modding..
and if there is then thats the one i would have edited.
Edited by shambles1980, 09 July 2012 - 04:34 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users