Error Reading Block With Lpt
Posted 13 July 2012 - 06:28 PM
I made a lot of image (nandpro30a) and I've only ever encountered an error: error: 250 Reading block 195.
I tried to resolder (with wires as short and wide) and soldering a diode but does not work.
I tried with another computer, changing BIOS settings, with another version of nandpro, but does not work.
How can I fix? Thanks ^ ^
Posted 14 July 2012 - 12:52 AM
Posted 14 July 2012 - 01:32 AM
Is this the first TSOP you've tried dumping with this particular LPT flasher?
Yeah, I've solved a lot of errors remained just that and I can not fix it
Edited by fabiosuper14, 14 July 2012 - 01:33 AM.
Posted 14 July 2012 - 02:13 AM
Posted 14 July 2012 - 03:34 AM
If the error is always at that block no matter what computer you use or how many times you resolder then that means that block is bad and cannot be read. The 360 will have already remapped that block to the end of the nandchip data area.
Ok. I do not remap the dump, but proceed with the creation of the files ECC
(with the badlock). Correctly?
flash dump tool: Block ID 0x0195 found @ 0x03FF
Posted 14 July 2012 - 06:26 AM
As long as you have 2 matching nand dumps you you are good to create and program your ECC.
Once you get xell up and running use it in combination with you hacked nand update image (nandflash.bin) to update your nand as xell scans and auto remaps bad blocks.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users