Jump to content


Photo

Bricked Sammy Ms28


  • Please log in to reply
5 replies to this topic

#1 G Wikky

G Wikky

    X-S Enthusiast

  • Members
  • 3 posts

Posted 12 September 2012 - 12:04 AM

Ok, I'm in a bit of a jam here.
Last night I finally decided to flash my sammy ms28.
My onboard SATA detected my Xbox drive in JungleFlasher.
I proceeded to flash it with JungleFlasher by way of tutorials I've read and videos I've seen.

I'm running Windows 7 too by the way.

I used JungleFlasher, as stated earlier.
Found my drive. Clicked the MTK Flash 32 tab.
Clicked Intro/Device ID.
It found my Sammy and recognized it as the ms28.
I clicked Sammy Unlock.
I then clicked Read.
Saved my original firmware.
Then I clicked Write and it was writing the modified firmware to the drive and my power went out.
Now when I try to get it to recognize in JungleFlasher nothing comes up.
I try to get it to detect but then my PC freezes.
I have the right SATA port.
The right port in JungleFlasher.
Everything wired properly.
I just don't know how to get the original firmware back on to it now.
If I can get that I'll attempt to reflash it.

I'm not new to the modding world. I've hard modded my PS1 & PS2, softmodded my Wii and Xbox1.
But this one is driving me insane.

Can anybody please help?

#2 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 12 September 2012 - 12:07 AM

look in the jf tut, there is a part about pmt unbricking a sammy.

http://jungleflasher...ngleFlasher.pdf

#3 G Wikky

G Wikky

    X-S Enthusiast

  • Members
  • 3 posts

Posted 12 September 2012 - 01:12 AM

I tried what it said in that tutorial and each method I try freezes my PC.
I waited an hour for some sort of progress and nothing.

I'm running Windows 7 Home.
I have NVIDIA nForce chipset.

Sammy ms28 drive.
I power my sammy with my xbox with the A/V cable plugged in to prevent it from shutting off.

Just don't know how to get it back to being able to be read with JungleFlasher.

I've read about DosFlash but haven't found a good tutorial or video for it yet.
If there is ANY way possible to unbrick this thing I'll be a happy camper.
I have the resources to get it back just need the know-how now.

Any help is appreciated.

*EDIT*
And now my drive is making a constant clicking sound when it's powered on.
Probably not a good sign...

Edited by G Wikky, 12 September 2012 - 01:15 AM.


#4 G Wikky

G Wikky

    X-S Enthusiast

  • Members
  • 3 posts

Posted 12 September 2012 - 01:31 AM

I opened JungleFlasher.
Clicked MTK Flash 32.
Clicked Intro/Device ID.
Clicked Yes.
Powered on my sammy.
This is the result.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Sep 11 19:10:08 2012

This is a Wow 64 process running on a 64 bit CPU
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 8 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: E: F:
Found 0 CD/DVD drives

Sending Vendor Intro to port 0x09E0
Status 0x7F
Re-sending Vendor Intro:
.........
Device Intro failed!


#5 boneym

boneym

    X-S Senior Member

  • Members
  • PipPip
  • 247 posts

Posted 12 September 2012 - 07:50 PM

Nothing recovers a bad flashed samsung better than a via 6421 pci card
running driverless with code 39, cheap as well.

#6 iateshaggy

iateshaggy

    X-S Hacker

  • Members
  • PipPipPipPipPipPip
  • 2,514 posts
  • Xbox Version:v1.6
  • 360 version:v4.0 (jasper)

Posted 13 September 2012 - 12:47 AM

i agree, a 6421 and all u have to do is hit intro and power the drive and its over.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users