Jump to content


Photo

Tsop-not Writeable


  • Please log in to reply
6 replies to this topic

#1 vandykeave

vandykeave

    X-S Member

  • Members
  • Pip
  • 63 posts
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 12 September 2012 - 03:39 AM

Just got hold of xbox 1.0 wanted to tsop, soldered 2 points required soft modded using Heimdall disc

Attempted flash and it says "Flash not writeable"

What am I doing wrong ???? Or what haven't I've done.....

PS been stuck on this for over 4 hrs please HELP !!!

#2 MrMajst3r

MrMajst3r

    X-S Senior Member

  • Members
  • PipPip
  • 191 posts
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 12 September 2012 - 01:04 PM

Maybe you has SHARP TSOP?
It needs additional wire for flashing:
IPB Image

Edited by MrMajst3r, 12 September 2012 - 01:05 PM.


#3 shambles1980

shambles1980

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,092 posts
  • Location:wales uk
  • Xbox Version:v1.2
  • 360 version:v4.0 (jasper)

Posted 12 September 2012 - 03:08 PM

1.0 tsop points are 1 on top of the board and 1 on the bottom of the board...
dont get misteaken with 1.2 boxes and on wards where both points are at the top of the board..



#4 vandykeave

vandykeave

    X-S Member

  • Members
  • Pip
  • 63 posts
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 13 September 2012 - 02:30 AM

QUOTE(MrMajst3r @ Sep 12 2012, 07:04 AM) View Post

Maybe you has SHARP TSOP?
It needs additional wire for flashing:
IPB Image




Thanks for the reply ...but not a SHARP TSOP

Not 100% sure but is either Hynix or Hyundai .

@ work replying from phone

Any suggestions on this type of mod.

Edited by vandykeave, 13 September 2012 - 03:18 AM.


#5 shambles1980

shambles1980

    X-S Freak

  • Members
  • PipPipPipPipPip
  • 1,092 posts
  • Location:wales uk
  • Xbox Version:v1.2
  • 360 version:v4.0 (jasper)

Posted 13 September 2012 - 01:09 PM

its going to be your solder points then..

be carefull not to iuse to much heat when you solder them together.
if you have a lot of dificulty doing ti then get a small strand of kaynar wire and solder that to the points to create the bridge..

the only explanation thats let is the points arent connected or a trace is gamages so you will need to use alt points for bridging.

#6 vandykeave

vandykeave

    X-S Member

  • Members
  • Pip
  • 63 posts
  • Xbox Version:v1.6
  • 360 version:unknown

Posted 14 September 2012 - 03:10 AM

QUOTE(shambles1980 @ Sep 13 2012, 07:09 AM) View Post

its going to be your solder points then..

be carefull not to iuse to much heat when you solder them together.
if you have a lot of dificulty doing ti then get a small strand of kaynar wire and solder that to the points to create the bridge..

the only explanation thats let is the points arent connected or a trace is gamages so you will need to use alt points for bridging.

What r the alternate points?




#7 MrMajst3r

MrMajst3r

    X-S Senior Member

  • Members
  • PipPip
  • 191 posts
  • Xbox Version:v1.1
  • 360 version:unknown

Posted 14 September 2012 - 07:15 PM

Here smile.gif
IPB Image




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users