Jump to content


Photo

Corona With Phison And Hynix Chip


  • Please log in to reply
No replies to this topic

#1 ravendrow

ravendrow

    X-S Senior Member

  • Members
  • PipPip
  • 285 posts
  • Xbox Version:unk
  • 360 version:v5.0 (360S - trinity)

Posted 15 September 2012 - 05:45 AM

so a friend brought me his 4gb slim to RGH it looks like a corona V2 so i hooked up the sd card reader it detects the chip but says its size is zero...after taking it out of the case i found a hynix 16mb nand soldered to the bottom of the board so i tried to dump it via SPI and i get some jacked up flash config. just wondering if anyone has seen both chips present on the board and how i should go about dumping it oh not sure if this is supposed to happen but when i was trying to use the sd card method to dump the nand i noticed when i connected the main xbox 360 resonator to ground and plugged it in the fans spin up fast and after about 5 seconds there is a tick unhooking the resonator stops the tick when you plug it in but it still says the size is zero




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users