Problems Won't Stop!
Posted 18 September 2012 - 05:07 AM
Posted 18 September 2012 - 05:24 AM
Posted 18 September 2012 - 04:30 PM
Posted 19 September 2012 - 02:29 AM
@iateshaggy i dont think i will buy a new console not before i see what kinds of problems will occur.Personal Computer power!
Posted 19 September 2012 - 12:47 PM
Posted 20 September 2012 - 10:14 PM
Posted 21 September 2012 - 12:06 AM
Posted 21 September 2012 - 12:13 PM
@mike12345678 no i didnt do the xclamp fix.i overheated the green board with a hair dryer(i didnt have any heatgun but i saw that a hair dryer does also good job).
You 'saw that a hair dryer does also good job'?
Posted 22 September 2012 - 11:55 AM
that is why i told u to get a jasper or newer, they don't have problems.
then why do i have 3 in my shop right now
stop spreading wrong information
e74 is bad gpu, it needs to be replaced there is no other way around it
Posted 22 September 2012 - 01:23 PM
If I had to bet on which console would last longer; a stock 2011 Trinity or a fan modded 2005 Xenon, I'd be placing my bets on the Xenon all day long.
I've always been able to fix E74's with GPU reflow.
Hair dryers can not reflow a GPU.
Heat guns can but most people will get the temp too low or too high and just not get it right.
I do use a heat gun but it has the right temp. Plus I also use a mobo preheater, and a jig, liquid flux, and an IR digital thermometer to get the temp just right.
Posted 23 September 2012 - 12:11 AM
Posted 23 September 2012 - 03:02 PM
Posted 24 September 2012 - 12:30 PM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users