Posted 29 August 2003 - 09:23 AM
-dump the drive into the xbox
-boot through evox
-let evox partition the disk for you
-ftp into the xbox
-transfer the evox.xbe and evox.ini
are these the right steps?
Posted 29 August 2003 - 09:55 AM
backing up the c and e drive is optional, but if you wanna do it.... do it.....
here's my step :
- get a slayer cd iso
- burn the slayer cd iso to a cd-rw
- replace the oroginal xbox hdd with a new hdd
- put the original hdd in a save place
- put the slayer cd in the xbox
- boot with the slayer cd
- pick option 3
- pick option 3-1 (new large hdd install)
- wait till it finished copying
- take out the slayer cd
- reboot your xbox
- evox will now boot
- turn off the mod-chip
- original dash will now boot
well... this will get your xbox start and running with your new hdd,
and if you want to... you can copied back the c and e drive from your pc to your xbox.
Posted 29 August 2003 - 04:04 PM
what does 4920 means?
do i get slayer installer in the usual place?
Posted 29 August 2003 - 05:39 PM
anyway pick option 3-1 to make a large hdd prepared in no time....
no, you don't get it from *the usual place*...
click the link in my sig and read on how to get it....
Posted 01 September 2003 - 10:36 AM
-does a ms dashboard gets intsalled when i install it on a new hd with evox?
-are all versions of ms dashboard the same?
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users