 Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums |
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
  |
 1.6 Help |
| grislywaltz |
 Dec 29 2004, 05:14 AM
Post
#1
|
|
X-S Enthusiast Group: Members Posts: 10 Joined: 9-October 04 Member No.: 154523  |
I modded my 1.3 xbox a while back with an Xecuter 2.6, and now my friends want to do theirs, but they have 1.6's. I'm assuming they can use the same chip, but they probably need a different bios. What I need to know is: how to tell if they 1.6 or 1.6b's, what bios to use once I know, and if you can flash the appropriate bios with a disc (the same as I did on my box) or if you need an older box, or whatever.
Thanks a lot for your time |
   |
 
|
| otherguy |
Dec 29 2004, 05:31 AM
Post
#2
|
|
X-S Freak  Group: Members Posts: 1633 Joined: 25-October 03 Member No.: 69920 Xbox Version: unk 360 version: unknown |
The 1.6 and 1.6b is exactly the same - only difference is the ram that's used. "1.6b"s use non-samsung ram.
For 1.6 boxes use Evox M8+ 16 If you need to edit anything use the app "Evtool" its the xbtool equivalent for the M8 bioses Depending on the version of flashbios that comes on the X2.6 chips - you should be able to reflash them in the 1.6 machines without any problems. They should also have support for flashing over the network - a nice addition After you have the right bios on there - setup shouldn't be any different |
|
|
|
| senator |
Dec 29 2004, 05:37 AM
Post
#3
|
 X-S Freak Group: Members Posts: 1574 Joined: 18-October 02 Member No.: 5269 Xbox Version: v1.0 360 version: v1 (xenon) |
NOT forgetting that the 1.6 xbox needs a complete LPC rebuild so unless you can solder you may have trouble... It will be harder than modding the earlier xboes...
 |
|
|
|
| otherguy |
Dec 29 2004, 05:43 AM
Post
#4
|
|
X-S Freak Group: Members Posts: 1633 Joined: 25-October 03 Member No.: 69920 Xbox Version: unk 360 version: unknown |
yea - just follow the guide on xecuter's page: http://www.teamxecuter.com/x3/tutorials/x3pin16.htm
keep in mind some of the steps are for the X3 |
|
|
|
| grislywaltz |
Dec 29 2004, 05:45 AM
Post
#5
|
|
X-S Enthusiast Group: Members Posts: 10 Joined: 9-October 04 Member No.: 154523 |
I know about the LPC rebuild, and am not worrying about that. But I still need to know which bios to use for each version, and how to flash the appropriate bios. Do I just burn it to a disc?
|
|
|
|
| otherguy |
Dec 29 2004, 05:49 AM
Post
#6
|
|
X-S Freak Group: Members Posts: 1633 Joined: 25-October 03 Member No.: 69920 Xbox Version: unk 360 version: unknown |
apparently you also need to know how to read my first post
|
|
|
|
| senator |
Dec 29 2004, 05:51 AM
Post
#7
|
|
X-S Freak Group: Members Posts: 1574 Joined: 18-October 02 Member No.: 5269 Xbox Version: v1.0 360 version: v1 (xenon) |
IF X3 chip X3 bios.....
Anything else M8 Plus 16 Depending on chip? depends how can flash... Generally from disc, from hard drive from pc-usb etc... depends on the chips exact features....Which will tell you in the manual you get which chip !!! |
|
|
|
| senator |
Dec 29 2004, 05:52 AM
Post
#8
|
|
X-S Freak Group: Members Posts: 1574 Joined: 18-October 02 Member No.: 5269 Xbox Version: v1.0 360 version: v1 (xenon) |
QUOTE(otherguy @ Dec 29 2004, 06:20 AM) apparently you also need to know how to read my first post    |
|
|
|
| grislywaltz |
Dec 29 2004, 11:13 PM
Post
#9
|
|
X-S Enthusiast Group: Members Posts: 10 Joined: 9-October 04 Member No.: 154523 |
Apparently you didn't read my first post, because you only told me which bios to use on 1.6's, not 1.6b's. You also didn't tell me how to tell the difference. I didn't act like a jerk when you didn't answer my questions, so I don't know why you're being one because I needed more information.
|
|
|
|
|
| Lo-Fi Version | Time is now: 22nd May 2013 - 04:17 PM |
