xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Duox2 Blinking Red, Is this normal
joioi50
post Nov 27 2004, 11:57 AM
Post #1


X-S Member
*

Group: Members
Posts: 130
Joined: 20-November 03
Member No.: 75620
Xbox Version: v1.4
360 version: unknown
My Duox2 works fine but it comes a red blinking from inside of the crystal xbox is this good for the xbox and is it normal??? uhh.gif

I just modded the xbox and I'm installing evox, regards.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
waxbox
post Nov 27 2004, 12:11 PM
Post #2


X-S Enthusiast


Group: Members
Posts: 11
Joined: 8-July 03
Member No.: 48135
Hi,

This is perfectly normal, the red LED flashing = modchip is on and working good.

If you start your XBOX with EJECT, the DuoX V2 will be off and so the red LED.

Waxbox
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Cartmen
post Dec 19 2004, 02:07 PM
Post #3


X-S Enthusiast


Group: Members
Posts: 2
Joined: 30-March 04
Member No.: 110897
Hey,


I have the same problem my xbox does not work and my Duox V2 chip blinks red all the time!
If that's normal with this chip then i think i have a problem with the xbox mobo!!

It turns on and off all the time, on 1 xbox it turns on and off in both mods.
In the other xbox the original version works but when i use the chip it's starts and stops again.

I hops someone can help me.

GJ
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dibbz
post Dec 23 2004, 07:28 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 17
Joined: 19-October 04
Member No.: 157804
I had my first faulty duox2 the other day, installed it in a 1.2 and it would try to boot 3 times with no luck.

I threw in another chip and it worked fine.

I still have the old chip i need to check all the chips are soldered on ok, i'm sure its something simple i just need to sit down with the magnifying glass and see if i can get it going again.

I installed a 1.4 today and the red light does not flash but it boots the executer bios fine. This is the fist time I have seen this behaviour.

Odd, I still love the duox2 chips tho smile.gif
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
velocityboy
post Dec 23 2004, 02:38 PM
Post #5


X-S Young Member
*

Group: Members
Posts: 37
Joined: 28-July 04
Member No.: 133954
dibbz, where did you get that batch of DuoX2 chips from?
Thanks
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
rbn
post Dec 24 2004, 07:58 AM
Post #6


X-S Young Member
*

Group: Members
Posts: 30
Joined: 15-May 04
Member No.: 120127
I was under the impression that the flash was due to what bank you have selected.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Chancer
post Dec 24 2004, 10:36 AM
Post #7


Don't You Trust me?
***************

Group: Head Moderator
Posts: 18687
Joined: 31-October 03
Member No.: 71217
Xbox Version: v1.6
360 version: v3.0 (falcon)
QUOTE
If that's normal with this chip then i think i have a problem with the xbox mobo!!

Yes the LED on the Chip itself does blink red this is normal.
However your Xbox restarting or whatever is not so you have a problem with your install.
The LED on thechip blinking red has nothing to do with an error
If you get any weird problems after installing one of these always flick the bank switch back and forth a few times sometime in transit they are subject to pressure which stops them making contact internally. A few quick flicks and they will be fine. I have not had to link the switch out yet although someone has I believe
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
dibbz
post Jan 10 2005, 07:44 AM
Post #8


X-S Enthusiast


Group: Members
Posts: 17
Joined: 19-October 04
Member No.: 157804
They came from a supplier in Sydney, Australia. I do not know where he gets them from tho.

They had fujitsu chips whereas I had always gotten ones with AMD chips.

I do now order them from divineo, the batch I recieved last had AMD chips once more.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 26th May 2013 - 06:33 AM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx