@satanicshrew: The controller is done allready thanks for the tutorial tough!
@RDC: Yea i know the link said i needed to solder them in series witch i found weird since you adviced not to.
Anyway i replaced the 68ohm resistors with 150ohm resistors and its still working great thanks for the help
Now i want to mod my CG2 wireless controller, So got myself a couple of optocouplers they only had ones with 6 pins i bought 100ohm ones since they should be able to work with 2 or 4 leds.
From what i understand it has these 4 things
Collector > 5Volt point (TP5 on the board)
Emitter > To the LED's (with 150ohm resistors between them)
Cathode > To the ground (TP22 on the board)
Anode > 1.5volt (TP8 on the board)
Now my questions are: how do i see what is what on the Opto chip?
Do i need to solder a 10ohm resistor between the 1.5 volt point and the anode, or does this value change when you choose 2 or 4 LED's?This post has been edited by really_Wacky: Oct 7 2012, 10:45 PM