Evolutionx, Empty Drive Options

[kwixbit]

Hi,

After i managed to get my new HDD working, i have another problem, so i open a new topic.

I did "xboxhd" to make my new upgraded hard drive, when i boot i have the EvolutionX dashboard, however the drive (all partitions) seems to be almost empty when i FTP to it (there's a Cache folder though)

However the CD i used installed UnleashX on my stock HDD, how can i have UnleashX on my new HDD now?
Is there a way to perform a clean install?

Thanks

This post has been edited by kwixbit: Jun 23 2012, 07:04 PM

[shambles1980]

if your xbox is now softmodded. then you can download hexen "heimdalls xbox engineering disk" burn that to a dvd-r at 4x or slower.
Put that in the xbox. turn off the xbox and turn the xbox back on..

when it loads you will see a new screen..
use that to do a one click softmod install
I like to use krayzies 1.1.1 SC exploit. and unleash x dash.
"you can chose any you want"

follow all on screen instructions..
DO not turn off the xbox unless it tells you to..

when you get tothe menu. 1st back up your eeprom..
Then tell it back to previous meny or settings menu " there is only 1 option to go to a menu so use that 1"
When you get back to that window tell it to do a basic install .
When it is done it will tell you to remove the disk abnd reboot.
after that you will have whatever dash you chose. + a prety up to date softmod + shaddow c, and a decent dash.

[kwixbit]

I'm having some difficulties to find a download.
So meanwhile i tried to FTP UnleashX to the C: drive, but i get errors:

CODE

ommand:    CWD /C
Response:    250 CWD command successful.
Command:    TYPE I
Response:    200 Type set to IMAGE.
Command:    PORT 192,168,1,10,214,10
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed after transferring 262 144 bytes in 1 second
Response:    226 Transfer Complete.
Status:    Starting upload of C:\Users\Warren\Desktop\UnleashX_0_39_0528A\Default.xbe
Status:    Retrieving directory listing...
Command:    PORT 192,168,1,10,214,11
Response:    200 PORT command successful.
Command:    LIST
Response:    150 Opening ASCII mode data connection for list.
Response:    226 Transfer complete.
Command:    PORT 192,168,1,10,214,12
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Error:    Could not write to transfer socket: ECONNRESET - Connection reset by peer
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed
Response:    226 Transfer Complete.
Status:    Starting upload of C:\Users\Warren\Desktop\UnleashX_0_39_0528A\Default.xbe
Status:    Retrieving directory listing...
Command:    PORT 192,168,1,10,214,13
Response:    200 PORT command successful.
Command:    LIST
Response:    150 Opening ASCII mode data connection for list.
Response:    226 Transfer complete.
Command:    PORT 192,168,1,10,214,14
Response:    200 PORT command successful.
Command:    STOR Default.xbe
Response:    150 Opening BINARY mode data connection for file transfer.
Response:    450 Cannot access file.
Error:    File transfer failed
Response:    226 Transfer Complete.

The file is accessible, the naming should be no problem and there's enough free space left.
I also get error #450 sometimes.

Any idea?