Joined: 9-November 05
Member No.: 257390
wondering if any1 can shed some light on this matter for me on my old pioneer the games burn fine and work fine in teh 360 i decided to goto ihas as my boy wants to play online
so i followed the tut and did exactly what it said to the T in regards to updating and flashing the drive i ran the update first - currently up to date so i didnt flash anything and didnt reboot. backed up my files and flashed the ihas firmware for my dirve. (didnt reboot either) (will not rebooting make a diff to the burns ive just done ? and cause them all to fail like they have ?)
ok so i setup imgburn to how it said run my MW3 thru abgx and level 3 repair it fixed the topology and verified at end
so i chose its .dvd file in imgburn and away it went @ 4x OPC on <think it was OPC
ok and so verified after a burn.
stuck in drive and disc is unplayable ive tried about 5 games now all are doing same tried at diff speeds 4x & 2.4x with OPC off tried on cloneCD and same again
can any 1 help me here my little boy is ready to set about me now lol
This post has been edited by dave11674: Jan 15 2012, 03:11 AM
Joined: 29-August 11
Member No.: 456734
I've got a feeling your not burning proper backups and that you have patched the topology on a truncated backup causing some kind of issue? Maybe not that exactly, but are you using a proper clean ISO can you confirm you have run the XGD3 ISO through abxg360 1.06 with a 100% clean result?