Links to "everything" Matrix. Guides Full Guide To Install Xodus/Matrix & setup EvolutionX
by Kleiner Matrix Installation Manual
by Team Xodus Installing external SPST pushbutton switches with switch & mode indicators
by Susan K Installing an external enable/disable switch for the Matrix
by myst1x The Matrix/Xodus Noob Guide
by KrAzY USB Powered Xodus Programmer
by myst1x Adding Mod Chip Enable/Disable and BIOS Flash ROM Write Enable/Disable Switches To Your XBox
by Captain Dunsel How do I...find out which version of the XBox motherboard the Matrix will work on? *
For 1.0 & 1.1
motherboards, it's a standard install. Line it up and screw it down. There is nothing to solder. *
motherboards, one new wire is needed. You'll need to solder a wire from the Matrix D0 point to the appropriate D0 point on the motherboard, as it is not the same as the version 1.0 or 1.1 XBox's D0 point. *
For 1.3 & 1.4
motherboards, two new wires are needed. As with the 1.2 Motherboard, you'll need to solder a wire from the D0 point on the Matrix to the appropriate D0 point on the motherboard, and one more wire connecting to the LFrame. *
motherboards, four new wires are needed. As with the 1.2, 1.3, and 1.4 motherboards, you will need to solder a wire from the D0 point on the Matrix to the appropriate D0 point on the motherboard. Likewise with the 1.4 motherboard, you will need a new wire connecting to the LFrame. Another wire will be needed to connect the 3.3v to the LPC, and the last wire you'll need to add is connecting a ground to the LPC.*The LFrame on Motherboards 1.3 - 1.5*LPC Diagnostics
I will add more links to diagrams as soon as I find them.flash my Matrix chip via Evolution X?
To flash the Matrix from Evolution X, you must have the following in your evox.ini : Flash = 0xbf61,"SST - 49LF020",0x40000
Also note that the Matrix must be in mode 4 (both switches off) when doing so. know which size BIOS my Matrix supports?
The Matrix will support a 256k BIOS.
.... There's more on the way, I just have to keep hitting that search button! If there is anything incorrect or something else you would like to see in here please feel free to PM me with it. This post has been edited by MonsterTy: Jul 12 2005, 04:08 AM