xbox-scene.com - your xbox news information source
Quick Links: Main Forums | Xbox360 Forums | Xbox1 Forums | PS3 Forums
Xbox-Scene Forum Help  Search Xbox-Scene Forums   Xbox-Scene Forum Members   Xbox-Scene Calendar

Giganews Usenet Offers: +1150 days binary retention, 99%+ Completion, and Unlimited Speed/Access!

360 ODD Emulators: X360 Key $99 | Wasabi360 FAT $99 | Wasabi360 Slim $99
C4E's iXtreme Burner MAX Drive: LiteOn iHAS124 DROPPED TO JUST $17


Welcome Guest ( Log In | Register )

 Forum Rules Rules
 
 Reply to this topicStart new topic
> Not Booting Into Modchip
haychis
post Aug 25 2010, 08:51 AM
Post #1


X-S Enthusiast


Group: Members
Posts: 16
Joined: 6-April 10
Member No.: 435944
My xbox 1.6 was working fine.. then one day .. i press the power button for 2 secs as per usual, then it turned off then turned back on straight to original dash.

Tried it again, same thing.

It has the DuoX3 chip. I opened the box, and tried switching the banks, but same thing.

Any suggestion to wot oculd be wrong ?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Heimdall
post Aug 25 2010, 09:11 AM
Post #2


X-S Legend
*********

Group: Members
Posts: 5749
Joined: 27-August 08
From: UK
Member No.: 388964
Xbox Version: v1.4
360 version: v4.0 (jasper)
Check your soldering, especially the D0 wire. Try manually grounding D0 on the motherboard then booting, to see if your Xbox boots from the chip. If it doesn't then your chip is broken.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
haychis
post Sep 8 2010, 07:58 PM
Post #3


X-S Enthusiast


Group: Members
Posts: 16
Joined: 6-April 10
Member No.: 435944
Ok.. checked all the wiring and it appears ok. Bought another exact chip and replaced it. Resoldered the D0 and BT wires onto the chip. The BT, I grounded to the chassis of the xbox, so it boots straight into the chip, and same thing, the chip lights up for a second, reboots, lights up for a second, reboots, then the ring flashes different colours ....

Do you think the MB is gone ?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
haychis
post Sep 9 2010, 02:25 AM
Post #4


X-S Enthusiast


Group: Members
Posts: 16
Joined: 6-April 10
Member No.: 435944
SOLVED.

Unsoldered the little board (that u need for 1.6 xbox's) under the motherboard, and physically soldered wire to each point per wiring diagram. Think there was six. Then plugged in the original duox3 mod chip. BT soldered to ground so it boots straight into chip, cause there's no need to boot into stock dash anymore. It worked. So I'd say probably a problem with that little board, solder joint or something maybe. Anyways, gonna leave it as is, it works.

Thanks for your help.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post




 

Reply to this topicStart new topic

 

Lo-Fi Version Time is now: 19th May 2013 - 10:01 PM
Invision Power Board v2.1.7 © 2013  IPS, Inc.
Licensed to: Scenyx