Fbbuild 0.1 (2.0.12611.0) Options

[Sinning Soul]

Anyone upgraded from XBR to Fbbuild? I never bothered to go to the newest Freeboot. Any advice or info you can provide is appreciated!

Thanks!

x2

[johanmalan]

agreed. 360 Flash Tool can be used to decrypt your KV but I'm not sure where to get the correct SMC and SMC_config from... previously the first ibuild command in freeboot would extract all of this, but im not sure if using ibuild from freeboot .32 to get these files from an Original NAND is correct this time around?

Im also awaiting a tutorial to go from Completely Stock --> fbBuild

I think you can use ibuild to extract your current freeboot image and then add those files (kv.bin,smc.bin,smc_config.bin) into the new data folder for fbbuild.
If you extract from a original nand you need to find a hacked smc.bin for your console type, the rest whould be fine
correct me if im wrong

[Tag234]

Im rather lost... I'm trying to JTAG a new Xenon with fbBuild.

I used ibuild to extract kv.bin and smc_config.bin, then i used the hacked xell xenon smc. I put those 3 files in the fbBuild data folder along with the 12611 files, did fbbuild.exe -c xenon -d data\ -b 1BL -p CPUKEY fbBuild.bin

When i flash this to the xenon, it boots but goes right to xell as if just xell was flashed >.> where did i go wrong

[tk_saturn]

Just updated a Jasper 16MB/ aud_clamp, and it worked fine.

This post has been edited by tk_saturn: Nov 11 2010, 09:18 PM

[RRoD420]

Works awesome Jasper512! New dashlaunch works perfect, I installed avatars. Kinect working perfect!

[cory1492]

When i flash this to the xenon, it boots but goes right to xell as if just xell was flashed >.> where did i go wrong

read the note in the bin directory regarding freeboot_alt.bin, I think this applies to you.

[Tatsh]

Just installed, works awesome!

Enable Console Safety
Set passcode and reset
Go to parental controls and disable
- Xbox Live connection
- Xbox Live account creation
Set all ratings to unblocked (defaults are like PG-13 for films and etc)

However a few limitations it seems:
- Cannot customise avatar
- The old media player taken from a non-JTAG doesn't work; wonder if there is an update for it
- As far as I can tell, the hacked Xbox1 emulator doesn't work; Family Guy used to work fine, now it just freezes at the Xbox1 logo
- When you sign in with an Xbox LIVE profile, it will ask you to update every time (I guess unless you're not on-line). I really would like to know what IP range to block this.

Other than that, awesome. All 360 games work. Arcade games work. DLC is recognised.

Tested homebrew:
- NXE2GOD
- Snes360
- vba360
- XexMenu
- XM360

All working.

As some reports have stated, this dashboard feels slower than the previous on older consoles like the Zephyr/Falcon/Xenon. And that is the case for me. However, it's that or no Kinect I suppose.

If you don't have your iBuild format files (smc_config.bin, etc), you can use Flash360 to make them. Go to Settings and Options. Then choose Extract ibuild compatible files, extract data and put it in the appropriate place and you'll be fine.

Ignore the 2 warnings you get (doesn't match and not zero-paired). It should go fine, but again, it's YOU risking it.

[TheBiGW]

Has anyone who still has r6t3 installed applied the avatar update after flashing this? I don't really want to open up my 360 and remove the resistor tonight if I can help it. Got the image all ready to flash but don't want to screw it up when I put the avatars on.

[SNAAAKE]

anybody know when that "bestpig"(lol) fb maker might be out?

and that bridge point, is that in the bottom or top of the motherboard?

[stevec25]

Hello gentlemen,

Firstly, a big thanks to the makers of freeboot and the community here, much appreciated

I would like some clarification, please regarding the removal of the r6t3 resistor.

If:

UT61 or UT62 is present + points are bridged = protected from losing jtag but need to remove bridge to update
UT61 or UT62 present + bridges not bridged = not protected from losing jtag, but can still update to 12611.0

and final point for clarification, removal of the r6t3 resistor is equivalent to bridging aforementioned points.

Thank you very much for your time and patience with a noob like me

[69218]

anybody know when that "bestpig"(lol) fb maker might be out?

http://www.logic-sunrise.com/news-168543-e...-12611-gui.html

[syntaxerror329]

I would like some clarification, please regarding the removal of the r6t3 resistor.

If:

UT61 or UT62 is present + points are bridged = protected from losing jtag but need to remove bridge to update
UT61 or UT62 present + bridges not bridged = not protected from losing jtag, but can still update to 12611.0

and final point for clarification, removal of the r6t3 resistor is equivalent to bridging aforementioned points.

Removing R6T3 and bridging points both have the same end results. They protect you from killing your jtag.

You never have to unbridge or reinstal the resistor again unless you wanted to revert your console back to stock. Jtag updates do not blow efuses.

anybody know when that "bestpig"(lol) fb maker might be out?

and that bridge point, is that in the bottom or top of the motherboard?

No idea about bestpig but i sure hope he comes out with a new version.
The bridge point is on the bottom under the cpu.

[akula169]

SO, I'd imagine we'll have to wait for the download-able 12611 update package to add back in the Avatar support like we had to do with 9199. Correct?

[stevec25]

Thank you very much for the quick reply, syntaxerror329. I was worried about having to unbridge the two points before flashing, now I don't have to Will attempt tomorrow/on the weekend.

Thank you once again sir:)

[TheBiGW]

SO, I'd imagine we'll have to wait for the download-able 12611 update package to add back in the Avatar support like we had to do with 9199. Correct?

You can download the latest update from Microsoft and install it. I want to know if it's safe to do this with the r6t3 resistor still in place.

Download the file. (http://download.microsoft.com/download/4/1/D/41D9A2BA-3B48-4BD5-B613-122E7C3A1390/SystemUpdate12611.zip)
Click Save to save the console update .zip file on your computer.
Unzip the file. If you are using Microsoft Windows XP, Windows Vista or Windows 7, double-click the .zip file to unzip it.
Copy the contents of the .zip file to the root directory of your flash drive.
Unplug the USB flash drive from your computer.
Plug the flash drive into a USB port on your Xbox 360 console.
Restart the console.
When the console restarts, the installation program starts automatically. Select Yes when you are prompted to update the new console software.