Group: Members
Posts: 73
Joined: 23-February 09
Member No.: 405848
Xbox Version: v1.4
360 version: v5.0 (360S - trinity)
ok i have about 3 or 4 broken 1.2 - 1.5 motherboards and i was woundering if there is any way to solder some wires from one of these tsop's to my 1.0 and try to reflash my xbox
Group: Members
Posts: 38
Joined: 4-July 09
Member No.: 414698
Xbox Version: v1.0
360 version: none
Most likely not, unless you have some circuits in between that reads the broken mobos' TSOP and can write it to your 1.0 TSOP. Also, you'll need an external power source for both, as the other mobos' are broken and it's most reliable if your 1.0's system isn't trying to access the TSOP while flashing.
Group: Members
Posts: 3
Joined: 20-August 09
From: Hampton, VA
Member No.: 417572
Xbox Version: unk
360 version: unknown
How damaged are the 1.2-1.5 boards? Is Milksop still an option? And what about the 1.0 you're repairing. Is it from a bad flash? For the most part no direct write access is available without a test clip.