Ok, so I had some chameleon chips and a couple of 1.6 boxes...
I've been looking for a clear guide all over these forums and, well, none were clear enough for me...
Here's what you do:
-Install the pinheader but remove pin 3 in addition to pin 4.
-Re-build the LPC
-Cut the Lframe and solder a wire to any ground pad (I soldered mine to the pad under the closest screw)
-Install your Chameleon that you previously flashed with evox.m8.v16.fc.137.bin (this worked for me, if I am wrong and the plus version works too, I apologize; I did not have time to experiment)
If anyone wants pics of my install, I would gladly provide them.