Krayzie Ndure Installer (Gamesave Style), Official Thread Options

[jimandtonic]

no using smart FTP when i tryed flash it did the same thing
when i try to connect it says this

No connection could be made because the target machine actively refused it.

I followed this guide, and had no problems.

http://www.xbox-scene.com/articles/xbins.php

[suicidalchoas]

dude wtf is my comp gone to hell?

i have followed this to the T and its still no connecting


[R] Connecting to distribution.xbins.org -> DNS=distribution.xbins.org IP=199.3.239.231 PORT=21
[R] Connection failed (Connection refused)

thats alll i get from flashfxp

[neronostic]

dude wtf is my comp gone to hell?

i have followed this to the T and its still no connecting

Read step 6 in http://www.xbox-scene.com/articles/xbins.php carefully. That should solve your problem.

NKPatcher only works with stock MS bios's (it will just hang)
any specific reason you want to use a softmod ??

I've done a pros and cons list and like softmodding more than the chip. I've done a few for my friends, but they have newer xboxes. So, Ndure won't install on mine. Do you guys know of any other options? And how can I get a different kernel?

[xman954]

Do you guys know of any other options

reflash the TSOP with a stock MS bios, must do if you want XBL

there are 4 things that NDURE with NKPatcher can do over a mod bios without a switch
use the XBL xonlinedash < this is a NDURE only feature and must use a stock MS bios
shadowC < nkpatcher only
virtual EEPROM < nkpatcher only
play .ISO's directly from HDD < can be done with certain mod bios (IND5003, evox M8+)

put a switch and split the TSOP then you can have both a soft and hard mod

[suicidalchoas]

Read step 6 in http://www.xbox-scene.com/articles/xbins.php carefully. That should solve your problem.
I've done a pros and cons list and like softmodding more than the chip. I've done a few for my friends, but they have newer xboxes. So, Ndure won't install on mine. Do you guys know of any other options? And how can I get a different kernel?

can some tell me of im doing somthing wrong?

can i have some send me the game save or is that not allowed?

[IDJoe]

I am trying my first softmod (any mod) and intend to use Krayzie's method. I spliced a USB Type A female connector to my break away cable (Red to red, white to white, etc.) When I plug in a controller all is well. When I plug in a USB memory stick I get one of two responses (One causes the screen to flash brighter off and on, the other just is ignored.) One I am using a SD card in a USB adapter, the other is a PNY memory stick. Both devices the LED lights up.

I was expecting to see an error message and then the device to be formatted. But in neither case does the device show up as memory in the Xbox.

I have a v 1.3 box I think (sept 2003). Any help is appreciated. I can't copy the saved game if I can't get the xbox to recognize my memory. Thanks for your help. Let me know if you need more details.

[neronostic]

reflash the TSOP with a stock MS bios, must do if you want XBL

there are 4 things that NDURE with NKPatcher can do over a mod bios without a switch
use the XBL xonlinedash < this is a NDURE only feature and must use a stock MS bios
shadowC < nkpatcher only
virtual EEPROM < nkpatcher only
play .ISO's directly from HDD < can be done with certain mod bios (IND5003, evox M8+)

put a switch and split the TSOP then you can have both a soft and hard mod

Sorry xman, I don't mean to be a pain, but, I said it was TSOPPed and I'm not exactly sure it was. It was modded for me about 5 years ago and I know I don't have a chip. I don't go on xbox live, I use this xbox mostly just for emulators watching movies. Is there any other way to get around this without having to reflash?

[krayzie]

Sorry xman, I don't mean to be a pain, but, I said it was TSOPPed and I'm not exactly sure it was. It was modded for me about 5 years ago and I know I don't have a chip. I don't go on xbox live, I use this xbox mostly just for emulators watching movies. Is there any other way to get around this without having to reflash?

If you want the advantages of a newer bios without reflashing you could just let your tsopped bios boot to phoenix bios loader.

[IDJoe]

Krayzie, Could you help? You did a great job on the installer but I screwed it up. I installed everything ok and then went to add the extra files. I added them to the root E drive by mistake so I re-copied (ftped) them over to the apps folder. Then I started deleting things from the root E drive. Not sure what all I deleted but did not delete the eeprom backup or the apps.

I figured I would just run the exploit again to restore anything I might have messed up. But now when I run the installer (I had to copy the save again to the xbox) it tells me I no longer have the 5960 dash so it stopped the install.

I know I deleted the udata and tdata folders and I don't really care about recovering my saved games or music. But I don't know what to do next. I am not sure how to create a rescue disk to get the unit back to stock to try again. Prior to the attempt I had K:5530 and D:5960. I do have my eeprom backed up both on the e drive and the pc. I think I still have my backed up c drive in e\backup.

So now when I boot the box with the power button in it it loads to the extra's launcher unleash page. I can attempt to install a dual boot but upon reboot I get the extra launcher page every time. When I power up via the eject button xbox original Dash loads fine with the proper (old) 5960 dash.

Lastly if you or others can help thank you. It is redundant to state I am a noob but I would also appreciate a recommendation as to what dash to install unleash or evolution? Thanks, Joe

[Un0riginal]

Krayzie, Could you help? You did a great job on the installer but I screwed it up. I installed everything ok and then went to add the extra files. I added them to the root E drive by mistake so I re-copied (ftped) them over to the apps folder. Then I started deleting things from the root E drive. Not sure what all I deleted but did not delete the eeprom backup or the apps.

I figured I would just run the exploit again to restore anything I might have messed up. But now when I run the installer (I had to copy the save again to the xbox) it tells me I no longer have the 5960 dash so it stopped the install.

I know I deleted the udata and tdata folders and I don't really care about recovering my saved games or music. But I don't know what to do next. I am not sure how to create a rescue disk to get the unit back to stock to try again. Prior to the attempt I had K:5530 and D:5960. I do have my eeprom backed up both on the e drive and the pc. I think I still have my backed up c drive in e\backup.

So now when I boot the box with the power button in it it loads to the extra's launcher unleash page. I can attempt to install a dual boot but upon reboot I get the extra launcher page every time. When I power up via the eject button xbox original Dash loads fine with the proper (old) 5960 dash.

Lastly if you or others can help thank you. It is redundant to state I am a noob but I would also appreciate a recommendation as to what dash to install unleash or evolution? Thanks, Joe

Joe,

If you can still FTP to your xbox and you don't care about the data the easiest method would be to replace everything with original m$dash files.

D/L slayers .iso http://slayer.xbox-scene.com/
Extract using xiso http://www.xbox-scene.com/articles/xbins.php
Under system\all you want folder c and e.

First make sure everything is set up, wires where nobody can trip over them etc... (if you screw up during this you will have to resort to hot-swap to fix). This step should only take ten mins, if that.
Ftp to your xbox
copy the backup of your eeprom to PC
Delete everything on C and E
Copy the slayers C and E over to the base of their respective drives
Restart

This will put you back into virgin M$ state (but with the 5960 dash). From here you can just redo Krayzie's installer.

Un0riginal

[erehwon6811]

I need a little help with this installer. I've done this once before and already have a modded xbox. I'm doing this to mod another xbox with xbmc for our downstairs TV.

Unfortunately, I've forgotten some of what I did. I've gotten all the files I need from xbins. I updated the 1.1 installer I had from last time with that 1.1.1 update. I've read the readme files, but I can't help but thinking I missed something. I was wondering if there was a guide somethere in this thread that I missed.

I want to get everything settled out and ready for the install before I start doing anything. This xbox has a busted dvd drive and I'm temporarily swapping out a drive from one of my working xboxes to get it modded. I'm only using this for streaming my recorded tv shows, so I really don't need the dvd drive.

I do want to say thanks to all the developers of this installer. It worked perfectly last time I used it. I just wish I could remember everything I did last time.

[erehwon6811]

I'm still working on this. My xbox reconizes the save as a MA save, but it says it is corrupted. I'm wondering if I have a misplaced or missing file? I also have another question. I've been using my modded xbox to transfer the save to my mem card. I ftp the save to some unused folder on my e drive (emulators for example). I then move it from there to the mem card. I'm wondering if that could cause some issues. I'm doing something wrong and I can't figure out what.

[erehwon6811]

I finally got it working. I wasn't missing anything. I was just moving the save file over while it was still in that udata folder. I needed to take the save out of that folder when I tranfered it to the mem card. I'm a little annoyed that it took me all day to figure out it was something so simple. Everything is working fine now.

[kkosment]

listen i jus posted a new topic asking for help froom sombody who knows wtf they are doing when it comes to softmodding i ned the easies step by step emailed instructions or posted ones i dont even care i got the mech assualt game i dont want a clook loop and i still want in game music as well as live and i have no idea how to do it i also have action replay but idk what to do so neone tht knows what they are doing please help


thanx in advance
-kkosment

PS please excuse the typos in the typing

[moviecut]

@krayzie: will you release a last installer with the newest nk-patchers and so on? i think, the kingroach-pc-installer has some newer sources in it. whould be nice, if the krayzie ndure-installer whould get one last update, to make it even more perfect than it is