Joined: 17-April 05
Member No.: 214438
I'm doing the 360 ATX case swap. I'm, wondering if anyone has attempted to relocate the RF module to the front of a pc ATX case with a homemade harness that they made. I had a dead 360 laying around so I desoldered the RF modules male connector from it's pcb, as well as the female connector on the 360's motherboard. Now what I need is someones Electronic skill to help me come up with a wiring schematic on how to wire those two RF module connectors so that I can relocate the RF module. The two RF module connectors both have nine pins on each one. Already tried wiring from pin to pin , but as soon as I plug it into the 360 the Power brick LED turns Red.